You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

Four LA1009 halogen black bodied driving lamps approximately 170mm wide by 58m deep with 4-XBU10046 stainless steel fitting brackets.

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

NOW N.L.A was the lamp only less wiring.Fitted as original equipment check whether you have spot or fogs-standard on injection cars.

(number on lens 048025 )

150mm diameter with lugs at top and botton which means it will not fit our...

One pair of S6007 halogen driving lamps 135mm wide by 35mm deep approximately plus a pair of XBU10046 stainless steel brackets. The MONTE3 kit is double these parts.

Minispares design spotlight bracket fitted to cars where it mounts on the front panel valance and grille support panel giving it perfect rigidity so that the power of the lamp was not impaired. Requires a M8 metric nut. Many cheap aftermarket product...

You should always use this kit for fitting any auxiliary spot or fog lamps.

Kit contains wiring and safety relay-cheaper than a burnt out engine compartment.

Please note, SPI and MPI cars have this facility built as standard safety ...

Larger than the S6007 chrome lamps and narrower than the RL020 these black plastic backed lamps also find their way on single and twin point injected cars as replacements for the original Rover lamps.

Bulbs are H3 t...

chrome on brass original type hexagonal screw for the chrome rear lamp BHA4153

Pair of Chrome WIPAC spotlights. 135mm in diameter, 60mm deep with covers. The lamp is nearly all forward of the mounting bracket making it great for fitting in front of mini grilles. Bulbs are H3 type 55 watts GLB453.

Copies of the originals in vinyl

Incorperating the original small clear window to show if the lamp remains switched on.

Rear fog lamp bracket which attaches to the rear valance. Left hand drive only

If you have fitted the old type overiders and corner bars for the Retro look you will need to fit a modified bracket which is basically the right hand drive brac...

This lamp unit comes without a bracket and will fit either side, if your bracket is okay. The unit only comes from Rover with bracket but costs £29-93 so we supply it less a bracket at £10-00 savings. If you require a bracket for the right hand it is...