DOOR CHECK L/H PANEL GENUINE
ALA6473GEN

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat

In stockIn stock
L/H Inner hinge type A post repair panel with hinge fitting holes mini, MK3

this is a genuine heritage part.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat

In stockIn stock

Recommended usage 1 x ALA6473GEN to fit one mini.

People also bought products
DOOR CHECK R/H PANEL GENUINE
ALA6472GEN

R/H Inner hinge type A post repair panel with hinge fitting holes mini, MK3

this is a genuine heritage part.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
WINDSCREEN LOWER SCUTTLE PANEL NON GENUINE
HMP441001MS

This Non genuine pattern panel has the holes for windscreen wipers and jets with barely an inch of pillar.

On cars from 1992/3 on check the original windscreen drain channel as the VIN numbers were stamped above the clutch master cylinder-wi...

($44.85) £44.85 exc vat

($53.82) £53.82 inc vat
FRONT PANEL MINI 1997->2000 MPI (FRONT MOUNTED RAD...
ASJ360070MS

Reproduction version os ASJ360070. For the twin point only as it changed shape to accommodate the front mounted radiator and different bonnet fittings.

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat
HERITAGE FRONT GRILLE ASSEMBLY PRE 76 CLUBMAN
HMP441039

Really a built up half front end for the mini clubman, consists of a lower panel with headlamp panels,slam panel and stiffener between the front and slam panel,

but not inner or outer wings

($260.00) £260.00 exc vat

($312.00) £312.00 inc vat
BULKHEAD CROSSMEMBER COMPLETE
AHC36003

This is the crossmember for the dash at the back of the engine bay which holds the master cylinders. When fitting to Clubmans extra end pieces are required. Fits 1976 on but does not have PDWA valve bracket. The original Rover parts are supplied with...

($170.00) £170.00 exc vat

($204.00) £204.00 inc vat
INNER WING AND FLITCH PANEL Mk1/2 L/H
14A7901

For vehicles with external hinges and sliding type windows this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to.This is the left hand pane wing with radiator vent slats but not ...

($200.00) £200.00 exc vat

($240.00) £240.00 inc vat
INNER WING AND FLITCH PANEL Mk1/2 R/H
14A7900

For vehicles with external hinges and sliding type windows this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to. This is the right hand panel made by Heritage but not 100% perfe...

($155.00) £155.00 exc vat

($186.00) £186.00 inc vat
FLOOR EXTENSION PANEL FOR MINI VAN/ESTATES ETC
14A9023

Commercial Mini floor extension

It is an essential part for the correct restoration of all the longer wheelbase mini derivatives. From the original tooling.

($100.00) £100.00 exc vat

($120.00) £120.00 inc vat
FRONT PANEL MINI CLUBMAN PRE 1976
CZH563

genuine front panel for the mini clubman before 1976 when the subframe was rubber mounted.see AAM1022 for rubber mounted type as fitted from 1976 on.

the front of these panels is the same but the subframe mounting bracket on the...

($145.00) £145.00 exc vat

($174.00) £174.00 inc vat
FLOOR PAN L/H FRONT 1991 on
MSL25L

Aftermarket version of the L/H floorpan for 1991 on cars.

This floor was made stronger with smaller heel pad area to prevent vibration and rust and will fit any Rod change gear shift mini but was introduced on the first injection cars in 199...

($34.50) £34.50 exc vat

($41.40) £41.40 inc vat
WINDSCREEN CORNER PANEL L/H
MS6L

A non genuine panel made for repairing the corner of the windscreen panel which is prone to rust from water splashing up from underneath the front wheel arch.

Experience has shown its easier to fit the genuine panel HMP441001 al...

($16.88) £16.88 exc vat

($20.26) £20.26 inc vat
FRONT FLOOR PAN L/H PRESHAPED
MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
WING INNER WITH HOLE +A PANEL LEFT HAND MK3 TYPE 1...
ABD36005

Inner front L/H wing with the A panel and door stiffener check strap panel attached for ease of fitment and alignment.This has the large round hole for the fan as fitted from 1991on

($245.00) £245.00 exc vat

($294.00) £294.00 inc vat
MINI FRONT PANEL PRE 1976
MS4E

This early front (nose) panel will fit any Mini manufactured before 1976. It is probably easier to replace the entire panel than to repair a damaged one, especially if it's been hit more than once! Later Minis with rubber mounted subframes, use panel...

($89.93) £89.93 exc vat

($107.92) £107.92 inc vat
FRONT FLOOR PAN R/H PRESHAPED
MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
INNER HINGE REPAIR PANEL L/H
MSL41L

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section of inner wing

($12.90) £12.90 exc vat

($15.48) £15.48 inc vat
INNER HINGE REPAIR PANEL R/H
MSL41R

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section

($12.90) £12.90 exc vat

($15.48) £15.48 inc vat
GUSSET CLOSING PANEL R/H
14A8348

THIS PANEL PROTECTS THE UNDERSIDE OF THE WINDSCREEN VALANCE UNDER THE FRONT WING SECTION also fitted on the inner wing panel 14A8346/7

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
DASH RAIL UPPER METAL PANEL WITH ASHTRAY APERTURE
14A6675

This panel has mounting holes for later models facia crash panel. These holes will require blanking for true originality on earlier models without the facia pad

($55.00) £55.00 exc vat

($66.00) £66.00 inc vat
FLOOR PAN FRONT TO REAR L/H PRE 1990
FS006L

floor pan front to rear for the left hand side only to the correct floor shape before 1990-1 rib design change---ideal for MK1/2 restoration with original 4 flute indentation. This has the carpet stud brackets plus underside slinger bracket and mul...

($90.00) £90.00 exc vat

($108.00) £108.00 inc vat