TEMPERATURE TRANSMITTER 1970 ON MINI
GTR101

($4.30) £4.30 exc vat

($5.16) £5.16 inc vat

In stockIn stock
Thermal transmitter fitted in the cylinder head from 1970 on until its demise on the 1990 Coopers this part was the same as GTR143. One number was original fitment and the other supplied as the spare part by Unipart.

Fits 998 1275 and cooper...

($4.30) £4.30 exc vat

($5.16) £5.16 inc vat

In stockIn stock

Recommended usage 1 x GTR101 to fit one mini.
Cylinder Head Valve Sizes - Qty 1
Engine Components Cylinder Head - Qty 1
Power unit electrics Non Injection - Qty 1

People also bought products
VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...
2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
VALVE SPRING SEATS SHIMS 0.020"(set of 4)
SS1

Spring seat shims (set of 4), 0.020" thick (0.5mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT...

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
VALVE SPRING SEATS SHIMS 0.040" (set of 4)
SS5

Spring seat shims (set of 4), 0.040" thick (1mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT36...

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROCKER COVER BLUE MINISPARES WITH GFE6003 CAP
ROCKERCVR03

Unlike polished covers, these powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available in ...

($36.42) £36.42 exc vat

($43.70) £43.70 inc vat
TOP CAP TITANIUM RACE SET(8) FOR C-AEA526/7
C-AEA530

Set of strong lightweight titanium top caps to suit our valve springs C-AEA526/527 hard for single collet competition valves. Sold as a set of 8.

($80.00) £80.00 exc vat

($96.00) £96.00 inc vat
CYLINDER HEAD HEATER TAKE OFF OUTLET ALLOY 5/8"
12G2534ALLOY

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

($22.32) £22.32 exc vat

($26.78) £26.78 inc vat
OIL FILLER CAP RED LATE CARS/METRO
GFE6007

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat
INNER VALVE SPRING BOTTOM COLLAR
AEA403

Standard inner valve spring lower collar, use C-AEA654.

These are no longer required when using our C-AEA526 and C-AEA527 range of silicone wire springs which are a slight interferance fit and friction ...

($1.89) £1.89 exc vat

($2.27) £2.27 inc vat
THERMOSTAT HOUSING GASKET LATEST TYPE
GUG705558GM

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
ROCKER POST SPACER SINGLE PLATE
2A515

Spacers for under the rocker pedestals are used mainly by engine tuners to allow tappet adjustment to be made where cylinder head mods have been carried out. 1.3mm/0.0512" thick, this can be used to hold locating screw on rocker post assembly but the...

($2.37) £2.37 exc vat

($2.84) £2.84 inc vat
EXHAUST VALVE WITH LARGE COLLET GROOVE 850 998 110...
AEA434

Early Large cotter groove exhaust valve. Most small bore engines seem particularly prone to burning valves, it is highly recommended to replace the exhaust valves when you do a valve job! This 1.0" valve fits most early 948cc, 998cc and 1098cc engine...

($3.71) £3.71 exc vat

($4.45) £4.45 inc vat
31mm RIMFLOW EXHAUST VALVE
C-RIM107

We stock a limited range of Paul Ivey developed Rimflow valves for the A-Series.

30.9mm (1.217") diameter exhauste valve for 12G940 large bore casting is oversized to the stock version. Not only can you pick-up performance from...

($38.25) £38.25 exc vat

($45.90) £45.90 inc vat
ROCKER COVER BLACK MINISPARES WITH CAP
ROCKERCVR

Unlike polished covers, these black powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available ...

($36.42) £36.42 exc vat

($43.70) £43.70 inc vat
ROCKER COVER BLUE T BAR KIT
SAC71BLUE

Anodised in blue for that different look.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
ROCKER COVER T BARS(PAIR)
SAC71

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
ROCKER COVER T BARS WITH CHROME FITTINGS
SAC71C

Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Ki...

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat
ROCKER COVER T BARS RED KIT
SAC71RED

Anodised in red for that different look.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
THERMOSTAT SANDWICH PLATE WITH OUTLET
PEG10002

1992 TO 1996 SANDWICH PLATE. SPI AND CARB MINIS. HAS TAPPED HOLE FOR RAD BRACKET STUD. NO SENDER HOLES. SPI MINIS USE WITH 12G103 TOP HOUSING, CARB MINIS USE WITH PEQ10010(THERMO SENDER HOLE AT FRONT).

($27.98) £27.98 exc vat

($33.58) £33.58 inc vat