MK1/2 toe board with steering rack mounts.

($149.85) £149.85 exc vat

($179.82) £179.82 inc vat

MK1/2 BULKHEAD CROSSMEMBER PANEL NON GENUINE

Crossmember at the back of the engine bay where the master cylinders fit, fits MK1/2 models.

correct shape for a mark one unlike the laster version that is modified for carb clearance

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat

CROSSMEMBER BRACE BRACKET MK1/2 RH

MSP005R

Crossmember to inner wing bracket bracket for Mk1/2 R/H

not mini clubman

($25.73) £25.73 exc vat

($30.88) £30.88 inc vat

FLOOR TO WHEEL ARCH BRACKET L/H NON GENUINE

14A6610MS

Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623

($13.35) £13.35 exc vat

($16.02) £16.02 inc vat

FLOOR TO WHEEL ARCH BRACKET R/H NON GENUINE

14A6609MS

Rear subframe mounting stiffener panel R/H with holes for subframe mounting to wheel arch. Sits on ALA5524 or ALA5528

($13.35) £13.35 exc vat

($16.02) £16.02 inc vat

DOOR STEP & LOWER PANEL MK I&II RH

MS28R

2-3" lower section of body section

from A post to rear wheel arch including the vital door step sill profile that rusts plus the horizontal edge that the chrome trim sits on-for cars with hinge type doors.

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

REAR VALANCE CLOSING PANEL R/H

ALA5524

Right hand panel behind wheel arch with subframe mounting holes and splash guard panel to stop debris being thrown into rear valance-but is also available with rear valance closing panel as ALA5528 R/H and ALA8623 for L/H

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat

DOOR STEP & LOWER PANEL MK I&II LH

MS28L

2-3" lower section of body section

from A post to rear wheel arch including the vital door step sill profile that rusts plus the horizontal edge that the chrome trim sits on-for cars with hinge tye doors

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

FLOOR TO WHEEL ARCH BRACKET L/H

14A6610

rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat

DASH RAIL UPPER METAL PANEL WITH ASHTRAY APERTURE

14A6675

This panel has mounting holes for later models facia crash panel. These holes will require blanking for true originality on earlier models without the facia pad

($55.00) £55.00 exc vat

($66.00) £66.00 inc vat

DOOR POST REPAIR PANEL R/H MK1

MBS011R

the A post repair panel with hole for coureousy light swith about 8" of metal below and above the hole, for external hinge door types

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat

FRONT PANEL REINFORCEMENT "S" AS OPPOSED TO STD AL...

24A1918

This reinforcement for the bonnet platform panel was fitted to Cooper S models at an angle to enable fitment of oil cooler from 1966 on. Originally these were riveted by 2 pop rivets either end for all MK1 Cooper S. Painted black they were even found...

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat

FLOOR TO WHEEL ARCH BRACKET R/H

14A6609

Rear subframe mounting stiffener panel R/H with holes for subframe mounting to wheel arch. Sits on ALA5524 or ALA5528

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat

DOOR POST REPAIR PANEL L/H MK1

MBS011L

the A post repair panel with hole for coureousy light swith about 8" of metal below and above the hole. External hinge type cars MK1/2 and vans etc.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat

WINDSCREEN SURROUND LOWER PANEL REPAIR

HMP441001

Genuine panel that has the holes for wipers and jets with only a few inches of pillar which is basically the area that rots. Also referred to as the windscreen scuttle lower panel. Fitting the genuine type ensures you should get a better windscreen a...

($160.00) £160.00 exc vat

($192.00) £192.00 inc vat

HINGE A PANEL R/H EXTERIOR MK I

MS8R

For Minis with sliding windows and external door hinges. These NON genuine R/H outer A panels fit over the extra inner panel which have brackets on to reinforce the exterior hinges. If the outside one is rotten you can guarantee ...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat

HINGE A PANEL L/H EXTERIOR MK I

MS8L

For Minis with sliding windows and external door hinges These NON genuine L/H outer A panels fit over the extra inner panel which have brackets on to reinforce the exterior hinges. If the outside one is rotten you can guarantee t...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat

PLUG FOR STEERING COLUMN.RADIUS ARM SHROUD 24mm 1"

14A7091

Minis most used rubber plug 1.25" wide for holes approximately 7/8".

Fits floor, aerial hole and steering column extra hole and radius arm shroud on MK1/2 minis.These floor plugs vary in number from 11 in a Elf/Hornet,Mk1 and 1994 on cars do...

($0.88) £0.88 exc vat

($1.06) £1.06 inc vat

ENGINE STABILISER BRACKET LOWER ON BULKHEAD

14A6730

This is the engine stabiliser bar original lower bracket that is welded on the

engine bay bulkhead. This part often breaks away when the engine has been rocking around through poor maintenance of engine mounts and bushes.

The upper...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

RADIATOR COWL ON INNER WING PRE1975

14A6498

The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost square cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubbe...

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat