MAINS 998/1100+30, AEM3314-30
VP733-30

($19.85) £19.85 exc vat

($23.82) £23.82 inc vat

Out of stockOut of stock
vandervell bearings 1.64" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 30 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide

($19.85) £19.85 exc vat

($23.82) £23.82 inc vat

Out of stockOut of stock

Recommended products
ENGINE BUILD LUBE TORCO.4 Oz
KCLUBE

Favoured by proffessionals for press fitting pistons, pre lubing bushes, roller and plain bearings, journals and gears. Prevents scuffing, seizure, wear, rust. Waterproof and corrosion proof.

($10.88) £10.88 exc vat

($13.06) £13.06 inc vat
Alternative products
MAINS SET 30 OVERSIZE 998/1100 upto 1985 with all ...
AEM3314-30

Main bearings for the crankshaft as preferred by performance engine builders 30 thou oversize pre 1985

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($27.00) £27.00 exc vat

($32.40) £32.40 inc vat
People also bought products
CRANK THRUST WASHER SET 1275 3 THOU OVERSIZE
AEW2136-003

Set of +.003 thrust washers for 1275.

($7.60) £7.60 exc vat

($9.12) £9.12 inc vat
CRANK THRUST WASHER SET 1275 STANDARD
AEW2136

Set of standard thrust washers for 1275.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
MAINS SET 10 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...
AEM91886-10

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
PIN DRIVE OIL PUMP 850/998/1098
GLP142

Original short pin drive oil pump for all Pre A Plus minis with 850/998/1100cc engines except autos and others with star drive or the later slot drive pumps as found on A Plus blocks.

($17.40) £17.40 exc vat

($20.88) £20.88 inc vat
BLOCK GASKET SET SMALL BORE PLUS COOPER S
AJM202MS

Mini Spares own Universal gasket set.

This engine block gasket set fits all manual blocks and include rubber tappet chest covers and bolt seals, also including A plus and Pre A Plus timing gear and cover gaskets. For the equivalent gasket se...

($12.75) £12.75 exc vat

($15.30) £15.30 inc vat
PISTON SINGLE 998 MINI +060
P20773-60

998cc dished circlip type piston with 4 rings. Compression range of 8.3 to 9:1 depending on block and head but for best performance use later 3 ring flat top piston ADU3490-60. If you want to go faster, keeping that 998cc block, Big bor...

($70.59) £70.59 exc vat

($84.71) £84.71 inc vat
ENGINE BLOCK UPGRADED GASKET SET-ALL MINI
GUG701614CS

Genuine Mini Spares best selling super upgraded Klinger gasket set for any popular engine block.

So called genuine Rover gasket sets were so poor in quality or have incorrect parts we decided to put together our own correct real gasket set u...

($39.00) £39.00 exc vat

($46.80) £46.80 inc vat
RUBBER TAPPET CHEST COVER GASKET. 1966 on
12A1175

Tappet chest cover seals for all small bore and Cooper S engines (except pre 1966 which use 12A1139). Quantity required-2 per engine.

($1.07) £1.07 exc vat

($1.28) £1.28 inc vat
OIL SWITCH PRESSURE ADUSTABLE 20-120PSI
HPS1

A low oil pressure warning light switch is available to help protect the engine. The standard one comes on at 7lb-much too late to avoid damage. This one comes on at 20lb and is adjustable up to 120lb. Please note this is now a twin terminal switch, ...

($22.43) £22.43 exc vat

($26.92) £26.92 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250MS

Minispares universal super value head kit includes a head gasket, valve cover gasket, manifold gasket, thermostat gasket, heater tap gasket, 2x thermostat gasket, 6x HS2 carb gaskets, 3x HS4 carb gaskets,2x air cleaner to ca...

($10.42) £10.42 exc vat

($12.50) £12.50 inc vat
HEAD GASKET 1300 BLACK BK450 ORIGINAL GASKET
TAM1521

Payen,stamped BK450, original standard composite reinforced gasket used on all large bore engines by Rover including Metro and MG Turbo and is an exceptionally good gasket.

Asbestos free with copper type sealing rings. Compressed volume is ...

($11.33) £11.33 exc vat

($13.60) £13.60 inc vat
ROCKER COVER T BARS RED KIT
SAC71RED

Anodised in red for that different look.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
PRESSURE PLATE FOR DIAPHRAGM CLUTCH steel TYPE PRE...
22A598

Steel Road weight 4.87lbs( 2.211kg) Pressure plate for diaphragm type clutches.

Now same uprated material and design of C-AHT230-

Great alternative and upgrade for the obsolete Cooper S and std mini type backplate for ...

($99.00) £99.00 exc vat

($118.80) £118.80 inc vat
ULTRALIGHT EN8 STEEL FLYWHEEL 3.8Kg INERTIA STARTE...
C-AEG619

Ultra light (3.87kg - 8.53lbs) EN8 steel billet race flywheel for diaphragm clutch {NOT-Verto} with ring gear for non-pre-engaged starter

.Forged is more rigid at high speed.

The latest refinement of the Ultra-light Mini flywheel is...

($138.42) £138.42 exc vat

($166.10) £166.10 inc vat
CARB HS4 SPINDLE REPAIR BUSH
AUD3080

Worn throttle spindles cause erratic performance from your carb and sometimes the housing gets worn--These are the bushes to repair worn carbs when replacing spindles for HS4 carbs. As a guideline 0.3125" internal diameter ream body to 9...

($3.71) £3.71 exc vat

($4.45) £4.45 inc vat