SEAT RECLINER HANDLE MK1/2
24B4057

£9.98 exc vat

£11.98 inc vat

In stockIn stock
Seat recliner handle for factory fitted Mk1/2 recliner seats. Also fits some MGB, Sprite and Midgets.

£9.98 exc vat

£11.98 inc vat

In stockIn stock

Recommended usage 1 x 24B4057 to fit one mini.

People also bought products
HEADLINING AND SEAT COVER CLIP SET (20 per set)
C707

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

£4.96 exc vat

£5.95 inc vat
MINI REAR STATIC 3 POINT BELT IN GREY
MSSB1113GREY

Rear 3 point fitting static seatbelt in grey.

£19.20 exc vat

£23.04 inc vat
MINI SPARES REAR INERTIA SEAT BELT BLACK
MSSB1109

3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.


...

£28.68 exc vat

£34.42 inc vat
MINISPARES BLACK INERTIA FRONT SEAT BELT
MSSB1111

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...

£28.68 exc vat

£34.42 inc vat
SEAT BELT EYE BOLT
681-1

Eye bolt for harness mounting. sold individually, 7/16 UNF.

£2.08 exc vat

£2.50 inc vat
MK1 STYLE ALLOY GEAR KNOB
22G110ALLOY

Mk1 style alloy gear knob. Will suit any Mini standatd gear lever thread.

£7.28 exc vat

£8.74 inc vat
CLIP FOR 14A8009 MOULDING
14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

£1.22 exc vat

£1.46 inc vat
SUNVISOR 1970 ON WITH MIRROR IN BLACK
SV2017A

Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...

£45.29 exc vat

£54.35 inc vat
REPLACEMENT DIPPING INTERIOR MIRROR (SELF ADHESIVE...
CTB100060

Replacement black rear view interior mirror with self adhesive fixing pads. The mirror measures approximately 19.5 x 6.5cm

£13.84 exc vat

£16.61 inc vat
DOOR PULL HANDLE 1100
GLZ118

Interior door pull handle with chrome end pieces, different to the mini but was offered by Rover as a replacement until we showed them the difference.

Originally fitted to MGB and the Austin 1100/1300 range it has 120mm bolt hole centre spac...

£5.44 exc vat

£6.53 inc vat
HAND BRAKE LEVER RUBBER GRIP 1976 on
FAM8356

The rubber type grip fitted on handbrakes-

will fit any single cable hand brake from 1976 on

Mk1/2 used 13H5541 thinner plastic type--to fit this to pre 1976 early cars you will need to put lots of sticky tape on the h...

£5.10 exc vat

£6.12 inc vat
INTERIOR LAMP WHITE
EAM1650

Rectangular grey plastic with white plastic interior lamp was fitted to minis from 1974 until 1985. 4.25" long and 1.75" wide. From 1984 on Rover recessed the lamp AFU4092 into the headlining. Fitted with GLB239 bulb. The le...

£4.51 exc vat

£5.41 inc vat
INTERIOR DOOR HANDLE MK1/2
GLZ119A

MK1/2 interior door handle with screw and washer.

This solid "spoon" handle is brittle and easily broken.

These are the original shape as sold under the Unipart label, not the later Rover bagged item which was a reproduction with d...

£19.64 exc vat

£23.57 inc vat
CARPET FLOOR CLIP KIT
CARPET01

This is a car set of the 8 floor stud, the triangular base and three hook clip

that originally held your carpet set in place.

Parts are available seperate as

2H8445 - CLIP

14G8736- BARB ...

£5.97 exc vat

£7.16 inc vat
DOOR HANDLE MONTE CAR CHROME OPENING HANDLE
G283

Metal chromed old type classic handle revived for use on MG variants and then a fashion item on minis. On later cars CMZ312 screw might be required which has a smaller diameter head and longer thread. Length 90mm.

£7.50 exc vat

£9.00 inc vat
EYEBALL VENT METAL COVER SET (4 PIECES) TO BE STUC...
MSA0212

2 outer rings and 2 inner knobs which have to be stuck on.

£7.15 exc vat

£8.58 inc vat
SPEEDO COWLING OVAL TRIM
14A9907

Bezel for 24A2702 oval 3-gauge pod. This is the brightwork trim on the front of the plastic pod, it is held on with up to 14 whisker clips 14A9796. The clip to join the ends together for neatness is 24A472
<...

£20.15 exc vat

£24.18 inc vat
DEMIST VENT CHROME
14A9949CHROME

Chromed version of the standard demist vent on early cars where the ashtray is

mounted in the top and middle of the metal facia. Not for later cars with large

padded windscreen rails and ashtray in the front such as Mini Clubman and...

£11.20 exc vat

£13.44 inc vat
WINDOW WINDER HANDLE
CZA7109

Fitted on cars up to about 1982 approximately before spring type knob on handle was introduced for safety homologation YXX3199PA.

The screw this CZA7109 handle is ZKC3317.

£5.16 exc vat

£6.19 inc vat
MINISPARES UNION JACK 4 MAT SET
CARPET11

Our own tailored over-mat set for front and rear with the union jack emblem that used to be our trade mark before we changed to the love heart mini logo.

£24.00 exc vat

£28.80 inc vat