BONNET ASEMBLY VAN & PICKUP 1971 on
ALA8430

£210.00 exc vat

£252.00 inc vat

now

£193.20 exc vat

£231.84 inc vat

In stockIn stock
For vans and pickups this had later type hinge positions 1.25" from the edge as per the saloon but did not have the extra lip for the bonnet upper grille moulding which was never fitted as standard---Mk1/2 variants had the hinges in a different position. See 24A1182

£210.00 exc vat

£252.00 inc vat

now

£193.20 exc vat

£231.84 inc vat

In stockIn stock

Recommended usage 1 x ALA8430 to fit one mini.
Bonnet and Catches - Qty 1

People also bought products
BONNET MOULDING PLATFORM GENUINE
ALA6664

£18.00 exc vat

£21.60 inc vat

now

£15.30 exc vat

£18.36 inc vat
CLUBMAN SHAPE BONNET
CZH2609

Available again from genuine tooling

Fits all mini clubmans only. There is no aftermarket version available of this bonnet anymore.





this bonnet MUST use the later 1981 onwards BMP348 / BMP349 hinges

£199.00 exc vat

£238.80 inc vat

now

£179.10 exc vat

£214.92 inc vat
BONNET ASSEMBLY MK3 TO 96 WITH BONNET MOULDING PLA...
CZH455

British Heritage produced as original equipment, this Bonnet will fit all models beginning with the MK3. It is distinguished from the early models by the hinge location 1.25" from the edge and the lip for mounting of the upper grille moulding.See [l...

£210.00 exc vat

£252.00 inc vat

now

£189.00 exc vat

£226.80 inc vat
BONNET LANDER PANEL CLUBMAN
CZH149

Genuine bonnet lander panel for the Clubmman. See MS149 which is the non genuine alternative.

£55.00 exc vat

£66.00 inc vat

now

£46.75 exc vat

£56.10 inc vat
MK1 BONNET SLIDER INCLUDING VAN AND PICKUP
14A6493

early slider catch for Mk1 pre mk2 which used ALA6992.

£27.75 exc vat

£33.30 inc vat
BONNET LOCK PLATE STAINLESS STEEL
AAM1223SS

This is the guide plate for the bonnet locking pin, now in stainless steel.

£8.25 exc vat

£9.90 inc vat
BONNET HOOK CLEVIS PIN
4B8769

This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...

£0.75 exc vat

£0.90 inc vat
BONNET REAR GUTTER SEAL SPONGE PRE1991
14A9010MS

Called the rear bonnet seal it actually sits in the windscreen front scuttle panel on all minis up to 1991. This is the shape and size neoprene foam seal that we have found works best and has an adhesive backing to make fitting easier and less messy.

£3.25 exc vat

£3.90 inc vat
BONNET HINGE PAIR for MK3 MINIS on
HMP441027

A pair of bonnet hinges for mk3 saloons after 1971 unpainted

£33.15 exc vat

£39.78 inc vat
INTERNAL BONNET RELEASE CONVERSION
GS130273

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

£19.20 exc vat

£23.04 inc vat
RUBBER BONNET HOOKS - SMALL
MS119

2" rubber hooks, sold in pairs. To hold down your bonnet, or whatever.

£4.64 exc vat

£5.57 inc vat
BONNET OR BOOT TERRY TYPE SPRING CLIPS PAIR
MS122

These chrome spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in black. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you....

£8.64 exc vat

£10.37 inc vat
BONNET PROP RUBBER
2H9215

Black rubber bung to hold the bonnet prop in place on MK1/2 minis.

Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).

£2.60 exc vat

£3.12 inc vat
QUICK RELEASE BONNET HINGE PR MK3 ONWARDS
MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

£41.23 exc vat

£49.48 inc vat
BONNET REAR GUTTER SEAL ENGINE BAY AS FITTED FROM ...
JRC8000

This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...

£10.05 exc vat

£12.06 inc vat
BONNET OR BOOT SPRINGS BLACK
BS258

these BLACK spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in chrome. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you ...

£7.04 exc vat

£8.45 inc vat
BONNET PROP ROD
BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

£8.50 exc vat

£10.20 inc vat
Bonnet Prop Bracket RH for all pre injection minis
14A7806

This is the bracket on the inner wing to put your bonnet prop into when the bonnet is in the open position.

£4.88 exc vat

£5.86 inc vat

now

£4.25 exc vat

£5.10 inc vat
BONNET TAILORED SOUND PROOF FELT KIT
47H9615

Four tailor made felt pieces to fit in the segments between the bonnet strengthening webs to allow maximum under bonnet clearance.

See FELT860 for spray adhesive. These are about 1cm thick and the original very thick sound dea...

£25.60 exc vat

£30.72 inc vat
BONNET SAFETY CATCH HOOK-ALL MINIS
14A366

This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the lat...

£16.50 exc vat

£19.80 inc vat