WHEEL ARCH FRONT REINFORCEMENT FLANGE STIFFENING S...
ALR360380

£28.00 exc vat

£33.60 inc vat

In stockIn stock
These are required on the front wheel arches when fitting sportspack wheel arches. The flange on the standard wing has to be cut away to give clearance for 13" wheels and this is the replacement strip to stop the wing flexing. This is the standard part on the Sportspack car and supplied individualy. Pairs are available as HMP441029 See Downloads on web site for diagrams on where to cut wings and A panels under part numbers VUR100180MS-VUR100190MS-VUR100200MS-

VUR100210MS-VUR100220MS-VUR100230MS

£28.00 exc vat

£33.60 inc vat

In stockIn stock

Recommended usage 1 x ALR360380 to fit one mini.
Saloon and Front Ends - Qty 1

Alternative products
WHEEL ARCH FRONT REINFORCEMENT PAIR FOR SPORTSPACK...
HMP441029

If you fit 13" wheels and need to cut the wings away for clearance these are the reinforcements strips Rover used on the cars with Sportspack arches.

see Downloads on web site for diagrams on where to cut wings and A panels under part number...

£56.00 exc vat

£67.20 inc vat
Kit products
WHEEL ARCH FRONT REINFORCEMENT PAIR FOR SPORTSPACK...
HMP441029

If you fit 13" wheels and need to cut the wings away for clearance these are the reinforcements strips Rover used on the cars with Sportspack arches.

see Downloads on web site for diagrams on where to cut wings and A panels under part number...

£56.00 exc vat

£67.20 inc vat
People also bought products
SPORTS PACK ARCH FIXING STUD ORIGINAL TYPE
KLMP4402

Stainless steel stud for original production factory fitted sports pack arches.

These use FN105047 nuts.

New genuine arches now have an upgraded threaded brass insert and now use a stud ZUA000250.

£4.73 exc vat

£5.68 inc vat
BLACK DELUX MOULDED SILL TRIM
GZF108A

Fluted type equivalent of GZF105A. This is equivalent

design of CZH4316 which was fitted between mini special black arches. Sold per side.

£9.84 exc vat

£11.81 inc vat
STAINLESS STEEL GLASS WINDOW RAIL SUPPORT KIT WITH...
MSSK2105SS

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

£35.20 exc vat

£42.24 inc vat
DAMPER CAPTIVE NUT PLATE
14A6948

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

£4.14 exc vat

£4.97 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

£1.00 exc vat

£1.20 inc vat
MK3 DOOR HANDLE & BOOT FITTING AND GASKET KIT
CZH1785FK

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

£4.74 exc vat

£5.69 inc vat
ORIGINAL STYLE METAL FLOOR PLUG (1" FITTING)
14A7081METAL

Metal floor plug as per original with rubber seal.



For use in 1" hole.

£0.99 exc vat

£1.19 inc vat
REAR LAMP CAPPING R/H PICK UP
14A7557CAP

Non Genuine R/H lamp capping repair panel for the Mini Pick-Up.

The rear lamp panel is also available as 14A7557

£13.65 exc vat

£16.38 inc vat
LAMP CAPPING L/H REAR LAMP PICK UP
14A7558CAP

Non Genuine L/H lamp capping repair panel for the Mini Pick-Up.

The rear lamp panel is also available as 14A7558

£15.00 exc vat

£18.00 inc vat
Mk1 REAR SCREEN RUBBER SEAL
14A8744

Rear screen seal for mk1 cars which had the smaller rear window 1959-1967.

£11.50 exc vat

£13.80 inc vat
FRONT SUBFRAME BOLT FITTING KIT 1976 on
KGB10022FK

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

£14.46 exc vat

£17.35 inc vat
INNER WING PART PANEL L/H SPI 1991-96
CZH3067

part inner wing L/H from Damper bracket mounting pointing forward for SPI modles 1991-96 with large round electric radiatore fan hole

NON genuine panel

£52.20 exc vat

£62.64 inc vat
INNER WING R/H MK1 MINI 18.5" deep
14A8390

part inner wing R/H from Damper bracket mounting points forward MK1 except Clubman. 1959-69 it has no air hole in side-see CZH3064 for later type with hose hole.

NON genuine panel

£46.00 exc vat

£55.20 inc vat
MK3 MINI DOOR PLASTIC MEMBRANE (PR)
DL3030

Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...

£12.23 exc vat

£14.68 inc vat
DOOR A POST PANEL L/H NON GENUINE
MSL43L

Front A panel part of door frame for internal hinge cars Left hand.Non gen

£30.23 exc vat

£36.28 inc vat
DOOR A POST PANEL R/H NON GENUINE
MSL43R

Front A panel part of door frame with door stay hole for internal hinge cars right hand non gen.

£30.23 exc vat

£36.28 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

£11.63 exc vat

£13.96 inc vat
BONNET HOOK SLAM PLATE ON FRONT PANEL STAINLESS ST...
ALR1441SS

For MPI only when bonnet hook has been moved to central position.



This plate protects the bonnet lander panel from the hook and acts as a stiffener also. Stainless steel version.

£5.93 exc vat

£7.12 inc vat
MINI PICKUP TAILGATE PIN AND CHAIN
14A7759

Tailgate pin and chain for all pickup models, sold individually, 2 required per car.

£12.00 exc vat

£14.40 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat