For MPI only when bonnet hook has been moved to central position.

This plate protects the bonnet lander panel from the hook and acts as a stiffener also

This is the guide plate for the bonnet locking pin, now in stainless steel.

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.

3.3mm thick from the tanneries for use on horse bridles,wit...

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

2" rubber hooks, sold in pairs. To hold down your bonnet, or whatever.

When they introduced negative earth sytems for the MK3 cars they had to put these stickers on the cars to warn people as all previous models were positive earth which caused havoc with people trying to fit radios and other electrical equipment with t...

Black rubber bung to hold the bonnet prop in place on MK1/2 minis.

Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).

This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

British Heritage produced as original equipment, this Bonnet will fit all models beginning with the MK3. It is distinguished from the early models by the hinge location 1.25" from the edge and the lip for mounting of the upper grille moulding.See [l...

Around 1990 they moved the bonnet buffers from the hole fittings on the slam panel to the sides of the bonnet opening. Common sense says these will work on any year Mini. THESE ARE STICK ON TYPES and useful for sticking anywhere on the bonnet landing...