£22.50 exc vat
£27.00 inc vat
In stock
£22.50 exc vat
£27.00 inc vat
In stockRecommended usage 1 x C-AHT223GREEN to fit one mini.
Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...
Our favourite pads as the give less brake pad dust which destroys alloy wheels.
Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.
For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.
For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...
Mintex brake shoes for the rear of all minis which are 1.25" wide. Also fitted to front on early single leading shoe cars (dry suspension pre 1964) with a single wheel cylinder. Manufactured by Mintex and sold as a box set of 4 brake shoes for one re...
Carbon metallic pads for 4 piston calipers.
These require special bedding in and fitting intructions are available if new to this type of pad for racing.
For 7" diameter brake disc as fitted to 998cc Cooper. In C-TECH M1144.
General:
Improvements in braking efficiency can be achieved to a certain degree by replacing the standard asbestos free brake pads/shoes with alternative...
A pair of 7.5" brake discs and one set of Kevlar road brake pads.
BRIDGING BOLTS AND SEAL FOR BETWEEN THE TWO CALIPER HALVES ON 7.5" COOPER S CALIPERS. Should be torqued to 37/38Nm.
PRICED INDIVIDUALLY per disc but should always be fittted in pairs for safety and efficiency..
THERE IS AN ALTERNATIVE GROOVED AND DRILLED PAIR OF DISCS SOLD AS C-GBD496.
This stainles steel caliper piston fits all Minispares 4 pot calipers plus Metro and ERA turbo 4 pot calipers.
UK made 8.4" brake disc. Priced individually but should always be replaced in pairs for safety and braking efficiency. These are the best quality available of the low priced brake discs on the market and suitable for all standard road use.Beware of t...
Minispares own product-L/H, to last Rover drawings and supplied to us by a UK Heritage specialist. Originally the BMC castings were machined by Portland Engineering but in the 90's we put down tooling with IVRA/Italy who had them manufactured by Torm...
If your rear brake drums have 1" built in spacers such as all Cooper S and any post 1984 minis, these are the longer drum retaining screws, 2 required per drum and sold individually.
Correct size and length brake pad pin for the caliper using 7.5" disc size as fitted to Cooper S and 1275GT. 4 required for 1 car, also fits Cooper 7" calipers. 3mm diameter.
A pair of L/H shield covers for 7.5" disc as fitted to Cooper S
The little locating bracket to the hub is available seperate as BTA1209
Suitable for standard 8.4" / 7.5" /7" brake calipers. Also used for front wheel cylinders on twin leading shoe type drum brake cars. This is where you have 2 cylinders per hub as opposed to the early single leading type which had one cylinder only pe...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.