MINTEX REAR BRAKE SHOE SET (4 PIECES) - (MLR5)
GBS834AF

£10.65 exc vat

£12.78 inc vat

In stockIn stock
Mintex brake shoes for the rear of all minis which are 1.25" wide. Also fitted to front on early single leading shoe cars (dry suspension pre 1964) with a single wheel cylinder. Manufactured by Mintex and sold as a box set of 4 brake shoes for one re...

£10.65 exc vat

£12.78 inc vat

In stockIn stock

Recommended usage 1 x GBS834AF to fit one mini.
Rear Brakes Single Line & Tandem - Qty 1
Rear Brakes, Handbrake and Mechanism - Qty 1

Recommended products

The four tension springs as a car set for the rear drum brake shoes which should be replaced at least every other shoe change under normal circumstances.



This kit also fits front brakes with 1 cylinders per drum from 1959-64

Genuine AP product as original.This strange looking coily spring holds the front brake shoes against the drum for better braking efficiency by holding them in a set position which also cuts out brake judder caused by sideways movement.

Fitte...

People also bought products

EBC Blue Stuff pads are the endurance-grade, longest lasting material. Blue Stuff pads have a slightly lower friction coefficient than their counterparts; Green Stuff, Yellow Stuff and Red Stuff, but delivers far longer life.



Blue ...

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

Less Brake Dust and better stopping power!! The best pad available seems to be the only pad set available now as Rover/Unipart etc have all deleted it from their range

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...

Genuine AP brand new rear Left Hand back plate assembly (beware of copies).

These are ready to bolt on, brand new stock from AP Automotive and have the .75" bore genuine wheel cylinders GWC1102. Remember that all wheel cylinder ...

Genuine AP brand new rear right hand back plate kit (beware of copies).

These are ready to bolt on brand new stock from AP Automotive and have the .75" bore genuine wheel cylinders GWC1102. Remember that all wheel cylinder rubb...

Set of alternative pads for use with 7.5" wide discs.

From Mintex the developers and manufacturers of mini braking systems as per GBP103AF from Xpart now.

Used on all 4 pot alloy calipers as well as standard fitment for Metros.

A set of split pins and metal retaining clips are available as GBK1025

3.300"wide

Brake pads for 8.4" diameter brake dics, with single pot calipers as fitted to all Minis 1984 on, later 1275GT and Spridget. In C-TECH M1144.

General: Competition only pads. Not for road use.

Improvements in braking efficiency can b...

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP as supplied by Rover. Left Hand rear backplates are the only type available now for the Mini and have an extra hole, as per the Mini Metros, and take the same plug AEU1541A which is not supplied. If you have GWC1101

Genuine AP,One of the two return springs, per wheel, for Mini single-leading front drum brakes 1959-64 and all lower Mini rears. This is the spring with the coils near each end.

A good mechanic will replace the pull-off springs ([link]17H762...

Brake adjuster pin for all mini rear drum brakes plus single wheel cylinder front drum brakes. It is more economical to purchase 17H7620 kit which includes one adjuster pin and two tappets.

Take the squeal out of your discs-late model Mini or Spridget.

Genuine AP as supplird by Rover.Right Hand rear backplates are the only type available now for the Mini and have an extra hole in as per the Mini Metros and take the same plug AEU1541A which is not supplied. If you have GWC1101<...