£13.95 exc vat
£16.74 inc vat
In stock
Bleed nipple now 7mm spanner size but same thread-original 513118A used to be 6.2mm (1/4"). USE 660510 Bleed Spanner
GRK2076 is the repair kit for these cylinders now from Lockheed.
Quantity one per rear wheel and 2 required for car set.
Not handed.
£13.95 exc vat
£16.74 inc vat
In stockRecommended usage 2 x GWC1101 to fit one mini.
Paper gasket fitted between the rear wheel cylinder and the backplate. Once supplied with genuine wheel cylinders AP now seem to have discontinued this practice.
A handy little gadget for fitting the circlip holding the rear wheel cylinder on
Non genuine 0.625-5/8" reproduction rear wheel cylinder used from 1959-1967.
Quantity one per rear wheel and 2 required for car set.
Bleed nipple now 7mm spanner size but same thread-original 513118A used to be 6.2mm (1...
Non genuine 0.625-5/8" reproduction rear wheel cylinder used from 1959-1967.
Quantity one per rear wheel and 2 required for car set.
Bleed nipple now 7mm spanner size but same thread-original 513118A used to be 6.2mm (1...
Twin leading shoe brakes use two wheel cylinders per wheel, but you buy them singly. These cylinders are the 15/16" diameter style that will fit MK1/2/3 models 1964 on with .9375" bore size with 1 1/2" shoes.
Sold with bleed nipple but requi...
Rear wheel cylinder with 0.6875" bore size first appeared in 1974 on single line 1275GT cars and then on some split diagonal until 1976--also fitted to Innocenti cars when they had a unique 4 way swith union--- repair kits for these cylinders are [li...
Twin leading shoe brakes use two wheel cylinders per wheel, but you buy them singly. These cylinders are the 15/16" (.9375") diameter style that will fit MK1/2/3 models 1964 on with 1 1/2" shoes.
Sold with bleed nipple but require[link]37H38...
Genuine original AP lockheed L/H front wheel cylinder for twin leading shoe drum brakes for cars from 1964. Bleed nipple included and37H3833 gasket. These are 0.9375" bore size which is larger than the MK1 type and the repair kit is [lin...
Wheel cylinder rebuild kit for GWC1102. 75' rear wheel cylinder.
Sold individually per cylinder
Genuine AP as supplied to UNIPART/ROVER. Not aftermarket! These are .9375" bore size and were fitted to minis from 1959-64. One required per wheel and 2 per car set-supplied singly. Repair kit is GRK2013-This cylinder used 1/4" unf bleed...
Seal for between the brake servo and master cylinder, fits all late 1988 onwards vehicles where the master cylinder was mounted directly to the servo unit.
Master Cylinder repair kit for repairing the late GMC90376 master cylinder that was attached to the servo from 1995 until the end of production this kit uses a longer seal in conjunction with a nylon bearing. If your master cylinder has a drill hole ...
Replacement metal master cylinder cap as originally fitted to 1959-1963 Minis on single line brake systems is a great historic feature.
NOTE: DOES NOT COME WITH THE SWITCH - HAS A BLANKING BOLT FITTED
The last diagonal brake split models had this square plastic canister (reservoir). With metric unions it's recognised by the rectangular reservoir and small cap with ...
Genuine AP. The only master cylinder cap with a spade terminal on it which is for your brake fluid safety warning. This is AP latest and current offering in GREY as it is a superior cap, although a third cheaper than the white cap they deleted. Bewar...
Original AP Lockheed type metal body master cylinder.
Fitted with a plastic cap the metal original alternative is available seperately as 17H5323
Ensure the correct DOT4 or DOT5.1 brake fluid is used as these cylinders...
Almost every Mini built prior to the dual circuit system uses a .70" bore master cylinder. This kit fits them all. The original size in the '59-'64 Mini was .75" but as most of these cylinders have been replaced with the .70" size it is best to check...
Genuine AP Master cylinder with plastic tank.
The master cylinder is the heart of any hydraulic system and the hardest to troubleshoot. A pedal that can be slowly pushed to the floor indicates the master cylinder is worn. Fluid dripping off ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.