FRONT WHEEL CYLINDER SINGLE LEADING SHOE TYPE TO F...
GWC101

£23.25 exc vat

£27.90 inc vat

In stockIn stock
Genuine AP as supplied to UNIPART/ROVER. Not aftermarket! These are .9375" bore size and were fitted to minis from 1959-64. One required per wheel and 2 per car set-supplied singly. Repair kit is GRK2013-This cylinder used 1/4" unf bleed screw [link513118A[/link] Not handed.

£23.25 exc vat

£27.90 inc vat

In stockIn stock

Recommended usage 2 x GWC101 to fit one mini.
Front drum Brakes DRY 1959-1964 ALL HYDROLAST - Qty 2
Brake Hydraulics Identification Chart - Qty 1

Recommended products

We keep AP brake fluid because if they make all the braking and clutch system for the minis then their fluid must be right and guaranteed to be correct as their are some late silicon fluids that stops rubbers functioning properly.

Alternative products

Wheel cylinder repair kit for the very first Minis with one cylinder per front wheel only. 15/16" Please note you will need 2 kits per wheel cylinder as only 2 seals are supplied.

People also bought products

5/8" bore-Fitted to all Cooper 'S' hydrolastic cars from Sept 1964 plus mini to 1967.Also used from 1959-1963 and intermittently on. Leyland used this smaller type cylinder with servo on disc set ups as standard.

Bleed nipple now 7mm spanner...

Non genuine 0.625-5/8" reproduction rear wheel cylinder used from 1959-1967.

Quantity one per rear wheel and 2 required for car set.

Bleed nipple now 7mm spanner size but same thread-original 513118A used to be 6.2mm (1...

Twin leading shoe brakes use two wheel cylinders per wheel, but you buy them singly. These cylinders are the 15/16" diameter style that will fit MK1/2/3 models 1964 on with .9375" bore size with 1 1/2" shoes.

Sold with bleed nipple but requi...

Rear wheel cylinder with 0.6875" bore size first appeared in 1974 on single line 1275GT cars and then on some split diagonal until 1976--also fitted to Innocenti cars when they had a unique 4 way swith union--- repair kits for these cylinders are [li...

Twin leading shoe brakes use two wheel cylinders per wheel, but you buy them singly. These cylinders are the 15/16" (.9375") diameter style that will fit MK1/2/3 models 1964 on with 1 1/2" shoes.

Sold with bleed nipple but require[link]37H38...

R/H front wheel cylinder for twin leading shoe drum brakes. 1964 on with bleed nipple. Gasket 37H3833 x1 supplied. These are 0.9375" bore size which is larger than the MK1 type and use GRK2002 repair kit.

2 require...

Genuine original AP lockheed L/H front wheel cylinder for twin leading shoe drum brakes for cars from 1964. Bleed nipple included and37H3833 gasket. These are 0.9375" bore size which is larger than the MK1 type and the repair kit is [lin...

First twin leading shoe types from Sept 1964 up to 1967 pre MK2 with 0.8125" bore size.Gasket not supplied-see 37H3833. Lockheed,2 of these per r/h hub required and sold singly

Repair kits for these are 8G8816.

First twin leading shoe types from Sept 1964 up to 1967 pre MK2 with 0.8125" bore size. gasket 37H3833 not supplied. 2 of these per l/h hub required and sold singly.

Repair kits for these are 8G8816.

Later...

Replacement metal master cylinder cap as originally fitted to 1959-1963 Minis on single line brake systems is a great historic feature.

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

Cooper S 7.5" complete brake disc kit, except for disc shields, with Mini Spares own cast standard calipers. If you want or have 10" wheels this is the kit to convert from drum brakes to discs brakes.

This kit includes every nut bolt and co...

A pair of 7.5" brake discs and one set of Kevlar road brake pads.

NOTE: DOES NOT COME WITH THE SWITCH - HAS A BLANKING BOLT FITTED



The last diagonal brake split models had this square plastic canister (reservoir). With metric unions it's recognised by the rectangular reservoir and small cap with ...

Genuine AP. The only master cylinder cap with a spade terminal on it which is for your brake fluid safety warning. This is AP latest and current offering in GREY as it is a superior cap, although a third cheaper than the white cap they deleted. Bewar...

Original AP Lockheed type metal body master cylinder.

Fitted with a plastic cap the metal original alternative is available seperately as 17H5323

Ensure the correct DOT4 or DOT5.1 brake fluid is used as these cylinders...