£121.50 exc vat
£145.80 inc vat
In stock
£121.50 exc vat
£145.80 inc vat
In stockRecommended usage 1 x C-ARA4401A to fit one mini.
Used with most of the standard fans, definitely required if you have a breather type timing cover.
This spacer is: 4.05mm thick/0.162"
Known as the 'Hot Climate' or 'Export fan' this metal fan is moves the most air but also absorbs the most power.
The 11 blade plastic fan 12G2129 is quieter and is the most efficient in terms of power absorption and air movemen...
3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impeller...
3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.
Fitted with a PPS, glass filled plastic impe...
Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...
Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.
5/8" straight connector piece for heater hose modifications on late minis.
Useful when re-routing hoses or joing hoses.
long life silicon top radiator hose for the single point injection cars and HIF38 Carb cars.
This is made to fit cars with a thermostat sandwich plate and has a slightly different shape from the Cooper S and 1275 top hose where the thermosta...
Real Kevlar stranded hose,2 year guarantee-the only true Kevlar threaded hose available where you can see the strands, it is made for longevity and low heat transfer making this the best selling bottom hose in the market.
The built in proper...
Standard alloy thermostat housing. If you want the larger bore type as used on the Cooper with a sandwich plate see PEQ10019 housing GRH1140.
Requires thermostat gasket GTG101MS or GUG705558G...
Thermostat 88 degrees. Fitted to 998 and 1275 minis from 1988 to 2000. Also Metros 1980 to 1990 998 and 1275.
The original factory radiators had a seal to hold the switch in but on our special 2 core and 4 core radiators we used this screw in type switch for extra safety. Already fitted to mini Spares own radiators when originally sold, this is the replaceme...
Unless you're heavily into the concours scene you'll love these hoses. These silicone hoses will withstand higher temps and pressures and will last virtually forever and if you ever had to replace a lower hose you'll appreciate that last fact. These ...
Same as C-ARA4442 but supplied with a screw-in heat sensor unit, as required and fitted initially by Rover to SPI cars. Minispares adapted the safer screw type sensor as compared to the push and turn fit used by Rover, which on certain v...
Lower spacer tube for the one piece rad cowling as fitted from 1974 on.
the rubber grommets CAM4618 sit on this tube to silence radiator rattle.
Side mounted as per all pre 1996 cars. UK made with 2 core tubes. V shape fins 20 per inch the BIG Daddy of all rads.
This is a super cool lightweight alloy radiator BUT FOR PRE 1990 cars as it has the overflow pipe facing backwards.
Engine mounting bracket on the end of the gearbox which also holds the radiator support bracket. This fits to the alloy bracket 12G1318 on the front cover of the gearbox.
These 1/4"UNF 3/8" long bolts were used on the one piece cowling from 1974 on. Many people have punctured their radiator by using too long a screw. Also used as the small timing cover bolt on A series engines. Also the small bolt on the front wheel c...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.