£178.19 exc vat
£213.83 inc vat
In stock
£178.19 exc vat
£213.83 inc vat
In stockRecommended usage 1 x C-GRH006 to fit one mini.
Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.
Spring clip for securing the top hose on MPI front mounted radiator models, now in stainless steel.
Silicone heater hose, 39")1metre) for cars with the inline type heater valve or a straight take off on the cylinder head as fitted to post 1984 cars.
Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or t...
Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer wh...
Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.
5/8" straight connector piece for heater hose modifications on late minis.
Useful when re-routing hoses or joing hoses.
Long lasting silicon by pass hose between cylinder head and water pump.
These are easy to cut and slide on easier than the old conventional rubber type.
It has been made this length to fit 1275cc engine,which used the longest hose.<...
Silicon upper hose for 1275 GT. This is the same shape as the cooper S C-GRH247 but just over 1/2" longer--we have also increased the thermostat end slightly for ease of fitment and use on specials including Turbos with 1" bore thermosta...
Original mini half inch bore heater hose cut to metre lengths as required.
The MK1/2 had one hose 35" and one at 16" long, MK3 had one 35" and one at 29".(These are all maximum lengths).
Please note MK4 1976 on some had 42" heater t...
Water hose pipe clip for the GRH1140 top hose and twin point injection cars which had larger hoses fitted .This clip will wind down to fit most radiator hoses if required.
Real Kevlar stranded hose,2 year guarantee-the only true Kevlar threaded hose available where you can see the strands, it is made for longevity and low heat transfer making this the best selling bottom hose in the market.
The built in proper...
Special thin type clip for fitting the water by pass hose between the water pump and the cylinder head. Most ordinary jubilee clips will not fit the tight area where the hose fits. Also used on C-AHH8537 oil cooler hose.
Silicone heater hose, 42" for cars with the original heater valve bolted on the cylinder head.
Cars after 1976 require one of this 42" length and one C-GRH1006 39" length.
Cars from late 1984 to 1988 had 5/8" outlets on...
Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head. Pre 1976 cars can use 2 0f these lengths, commonly known as 1/2" bore heater hose. Also see C-GRH1007 for the longer 42" hose on 1976 on model...
Hose clip for 5/8" heater hose and used to locate 3/4" diameter anti roll bar in our C-AJJ4008 kit.
Clear plastic windscreen washer tubing sold by the metre only. This is the larger size and was known as 1/4" bore because GWW201M is 1/8" bore. This hose is actually now known as 4.8mm which is nearer 3/16".
this was known as 1/...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.