FRONT ADJUSTABLE ANTI ROLL BAR - RACE ONLY

Adjustable anti-roll bar kit complete

The kit contains a 3/4" steel bar, mounted in alloy mounting blocks. Two collars welded to the bar restrict sideways movement of the bar. Fully spherical jointed with sliding alloy blocks to allow ra...

£136.13 exc vat

£163.36 inc vat

KAD REAR ANTI ROLL BAR 5/8"

KAD002

KAD Rear Anti Roll Bar for Classic Mini.

The Mini with a high roll centre benefits from the fitment of anti-roll bars to control unwanted body roll. KAD Anti Roll Bars help to prevent body roll without having to fit or adjust shock...

£281.56 exc vat

£337.87 inc vat

KAD REAR ANTI ROLL BAR 3/4"

KAD003

KAD Rear Anti Roll Bar for Classic Mini.

The Mini with a high roll centre benefits from the fitment of anti-roll bars to control unwanted body roll. KAD Anti Roll Bars help to prevent body roll without having to fit or adjust shock...

£291.27 exc vat

£349.52 inc vat

CAMBER AND TOE REAR TRACK ADJUSTMENT BRACKETS

MS73EVO

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

£37.80 exc vat

£45.36 inc vat

SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS 4 GSV...

C-STR644A

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

£69.67 exc vat

£83.60 inc vat

ROAD RALLY RUBBER CONE SPRING - RED SPOT

C-STR687

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

£49.60 exc vat

£59.52 inc vat

RADIUS ARM REPAIR KIT

GSV1125

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

£9.98 exc vat

£11.98 inc vat

COMPETITION RUBBER CONE SPRING - YELLOW SPOT

C-STR688

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

£52.00 exc vat

£62.40 inc vat

SUSPENSION ONE PAIR OF ADJUSTABLE TRUMPETS/HILOS

HILO

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

£37.65 exc vat

£45.18 inc vat

HYDROLASTIC FLUID

MORRIS05

The term 'hydro' in the renowned Cooper "S" suspension system "Hydro-lastic" means at least in part a liquid. This famous system was designed by BMC make for smooth and fluid ride while taking all of the abuse of off road rallying. It is not uncommon...

£35.25 exc vat

£42.30 inc vat

SUSPENSION KNUCKLE JOINT

GSV1118MS

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

£3.05 exc vat

£3.66 inc vat

SPLIT PIN FOR REAR HUB NUT & GCV1105 CV JOINT

GHF511

Correct size split pin for the rear hub nut and the early smaller type CV joint GCV1105 fitted to drum brake cars and cooper small discs.

Split pin for common clevis pin list

GFK101 for CLZ409 ...

£0.11 exc vat

£0.13 inc vat

HILO REAR UNIT RODS AND PLUGS - ONE CAR SET

HILO-01

These are the metal rods required to fit your Hilo kit to the rear of a mini.

£12.00 exc vat

£14.40 inc vat

WASHER FOR SHOCK ABSORBER DAMPER

AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

£0.22 exc vat

£0.26 inc vat

REAR HUB OIL SEAL

GHS102

For the front wheel bearings of the Spridgets, rear of the Mini.

£1.24 exc vat

£1.49 inc vat

REBOUND BUFFER HYDROLASTIC. FLAT BUMP

21A1517

This is the flatter type rear rebound rubber on hydrolastic cars, uses exactly the same metal base plate as 21A1520 which is the larger cone type which is the bump stop rubber.

£4.49 exc vat

£5.39 inc vat

RADIUS ARM BRONZE BUSH

2A7325

This outer bush 2A7325 on the radius arm is bronze and needs reaming out when fitted. The inner ATJ4098 is a roller bearing--all parts are in a new kit GSV1125

£2.99 exc vat

£3.59 inc vat

REAR ANTI ROLL BAR KIT 12.7MM THICK FIXED

C-AJJ4009

Fixed rear anti-roll bar kit complete.

Contains a 1/2" steel bar and comes complete with all components required for fitment. It is not rubber mounted except for the metalastic bushes in the drop links, and is, therefore, very efficient...

£123.75 exc vat

£148.50 inc vat

RUBBER CONE SPRING GENUINE TYPE METRIC THREAD

FAM3968

Replacement rubber cone produced from original factory tooling to the original specification, complying to the original Rover/BMC drawing and manufactured in the UK and easily identifiable by having the original patent number "763432" moulded in to t...

£41.50 exc vat

£49.80 inc vat

REAR BUMP STOP KIT

C-AJJ3313

Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car's handling when fully loaded.

£22.79 exc vat

£27.35 inc vat

REAR SPAX ADJUSTABLE LOWERED SHOCK ABSORBER

C-STR305

All shock absorbers are not created equal, the Spax brand is often considered the top of the heap. Spax dampers are Krypton gas pressurised for much longer life and unlike standard oil filled shocks, they are consistent in light to heavy use. The scr...

£68.00 exc vat

£81.60 inc vat

HUB REAR GREASE CAP

ATB4098

Fits the rear hub of every Mini to protect the bearings grease from debris, but

this metal cap always seems to get damaged on 10" wheel cars or when you change the bearings - make sure yours are in place.

£6.00 exc vat

£7.20 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS44BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

£5.92 exc vat

£7.10 inc vat