REAR BUMP STOP KIT
C-AJJ3313

£22.79 exc vat

£27.35 inc vat

In stockIn stock
Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car's handling when fully loaded.

The rubbers are available separately as AHH7074.

See C-AJJ4007 for a front kit.

£22.79 exc vat

£27.35 inc vat

In stockIn stock

Recommended usage 1 x C-AJJ3313 to fit one mini.

Recommended products

Front progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. Improves car handling; especially under braking and when fully loaded.

Rubbers are available separately, AHH7074.

See C-AJJ33...

Kit contained products

Same bump stop as fitted to MGB, this was utilised by ST Works Abingdon to go on their bump stop kits C-AJJ3313/4007 for hydrolastic minis. Sold singly.

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

Plastic plug suplied in rear strut kit for HILO's.

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

Koni Shocks Possibly the best name in shock absorbers, and they're available for the Mini! Sold singly but recommend fitting pairs.



Please note some small modifications maybe necessary on the damper cover to clear the bodywork o...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

Koni Shocks Possibly the best name in shock absorbers, and they're available for the lowered Mini! Sold singly but recommend fitting pairs

see C-STR1675 for performance details.



Please note some small modifica...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type from the 1959/60 era or any arms if they are bent or damaged. If you've ever had to rebuild a Mini trailing arm you know w...

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type 1959/60 era or bent damaged arms.

If you've ever had to rebuild a Mini trailing arm you know what a hassle it can...

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

The term 'hydro' in the renowned Cooper "S" suspension system "Hydro-lastic" means at least in part a liquid. This famous system was designed by BMC make for smooth and fluid ride while taking all of the abuse of off road rallying. It is not uncommon...

Mini Spares product from own original tooling since 1989.This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the R/H rear radius/trailing arm.

This shroud uses 14A7091 rubber plug not suppl...

Longer damper for van,estate and pick-up.Adjustable gas shocks by Spax. All shock absorbers are not created equal; the Spax brand is often considered the top of the heap! Spax shocks are Krypton gas pressurised for much longer life, and unlike stand...

Floor pan front to rear for the left hand side, only to the floor shape before rod change cars - ideal for MK1/2 restoration.

The weathered and cracked rubber you see is not actually the hydro displacer bag, but rather this rubber boot to protect it. Sold singly 1 required per displacer.