£105.62 exc vat
£126.74 inc vat
Special order
£105.62 exc vat
£126.74 inc vat
Special orderRecommended usage 2 x CS818 to fit one mini.
This is the same as RSX519 but with the components for lowered suspension road use. 2 year warranty on these.
This kit is the 2 rear springs and shock absorber units. The left and right hand rear shock absorbers for lowered height when the car is 1" lower than standard.
Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).
Ultimate road or race geometry kit which includes following parts. Adjustable tie rods and lower arms with the correct bush kits. For the rear a set of camber and tracking brackets. When fitted the suspension must be properly set up. This kit will dr...
Complete rebuild kit for rear radius arm as sold by us since 2005.
Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.
Kit Includes: shaft, beari...
Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.
HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.
Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...
Mini Spares suspension kit includes all four adjustable machined alloy trumpets in 6082 T6 hardened alloy plus the two extended rod struts required for the rear. Many people will tell you why you should consider upgrading and using the original class...
For coil spring performance suspensions only this is the rear left hand damper for standard height suspension only
For coil spring performance suspensions only this is the rear left hand damper for lowered suspension only.
Extended length between mounting points is 385mm.
Compressed length is 305mm.
Spring platform has 40mm of adjustm...
For coil spring performance suspensions only this is the rear right hand damper for standard height suspension only
Genuine Minispares approved joints that we have supplied since 2004-
Beware of spurious products on the market as these are a safety critical part.
BEWARE OF CURRENT SO CALLED GENUINE ITEMS AS THEY ARE NOT FIT FOR PURPOSE.
...
Replacement rubber cone produced from original factory tooling to the original specification, complying to the original Rover/BMC drawing and manufactured in the UK and easily identifiable by having the original patent number "763432" moulded in to t...
The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can lose traction as it no longer is making full contact with the road. When the top of the wheel leans in toward the center of the car it'...
For coil spring performance suspensions only this is the rear right hand damper for lowered suspension only.
Extended length between mounting points is 385mm.
Compressed length is 305mm.
Spring platform has 40mm of adjustme...
Rear hub nuts on the mini are sided as the threads are different. This is for the LEFT hand rear. This has a left handed thread.
See NL611041 for the right hand nut.
Adjustable anti-roll bar kit complete
The kit contains a 3/4" steel bar, mounted in alloy mounting blocks. Two collars welded to the bar restrict sideways movement of the bar. Fully spherical jointed with sliding alloy blocks to allow ra...
These superb standard replacement shock absorbers are a gas upgrade over the standard item giving a higher level of performance of 25% claimed by the manufacturer. Fully open length from pin centres is 368mm and closed length is 222mm.
These are KYB 25% upgrade on their KYB standard oil damper. Beware of others who claim 25% upgrades. They do not know what they are 25% upgrade of. We have tried and tested every shock on the market, these are the best quality and priced
da...
Rear hub nuts on the mini are sided as the threads are different. This is for the right hand rear and is usual right hand thread to tighten.
See FNN2410 for left hand nut.
Priced Each, the closed length from pin centres is 215mm closed and open height is 292mm. operating stroke length 77mm. Sold singly but recommend fitting pairs.
Rear, adjustable anti-roll bar kit complete.
Contains 3/4" steel bar and spherical joints to ensure ultimate stiffness and effciency.
Not recommended for road use.
General:
Use of a rear anti-roll b...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.