£55.50 exc vat
£66.60 inc vat
In stock
This has rolled over ends for safety critical homologation(1996)and also allows extra clearance on fitment to the sportspack arches.The rolled over ends were never perfect and always slightly rippled.These are made in Automotive stainless steel material which bends easier than the originals that were in pure hard s/steel which gave problems in manufacture causing their demise.
Made in 430 Automotive stainless they still require washing and cleaning regularly owing to the positions where they are situated on the mini.
Fitted with fixing bolts but no nuts as per Rover.
Better than the last Genuine stainless steel originals these are to the quality Pianoforte reached when first supplying Rover with the open ended bumper but see DPB10165 with protective plastic ends which are more safety critical and might well have ended up like this for homologation at a later date before the minis demise.
Pianoforte had tooling problems making GENUINE bumpers difficult to fit, so Minispares have come to the rescue again taking 2 years to get it perfect in looks and fitting with the curled end edges made less dangerous than the originals.
Please note that most car parts are made in automotive 430 stainless which is magnetic as opposed to pure stainless which is not magnetic.
The same bumper with holes for the deluxe corner bars and overiders is available as 14A9871
Best finished bumper in the market place.
£55.50 exc vat
£66.60 inc vat
In stockRecommended usage 2 x DPB10166 to fit one mini.
An aftermarket version of the mini bumper in stainless steel it has the original type open ends (Rover curled the sharp edges over) - BUMPER BOLTS ARE FITTED BUT NO NUTS -3 required metric M6 thread nuts FS106047
For top qualit...
Mini Clubman front bumper, a very good copy produced from new tooling in a high quality chrome finish.
Remember-all chrome needs regular washing and cleaning as atmospheric filth contaminates modern day chrome,
For rear bumper see ...
Special shape chrome bolt for the bumpers on the Riley Elf and Wolsely Hornet
5 for front and 6 for rear--sold individually
Stainless steel with corner bar holes.
Any Mini with "corner bars" on the bumpers was probably considered a Deluxe model such as a Cooper S. If you want to restore your Deluxe or upgrade your standard you need these stainless steel bumpers w...
Brackets, bolts and rubber seating to hold 4 overiders on with the seating seal.
If you have overiders with corner bars you need kit MSSK010.
Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.
If you have standard overiders see kit MSSK011.
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.
Curley fibre glass Mini Miglia wheel arches, approximately 4.8." wide, with front edge 6.9" at widest point. Requires MS127FK brackets. Probably the largest wheel arches used on minis. Please note these are white gel coat not black and w...
Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Minispares 2 piece plastic roof moulding kit specially shaped for the corners and drain holes as fitted from 1980on in black.
The 2 joining and finishing clips are DBE10006PMD which need to be ordered seperately. The last Rover...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.