SPRING WASHER 1/4"

GFK1124

£0.07 exc vat

£0.08 inc vat

In stock

1/4" spring washer.

£0.07 exc vat

£0.08 inc vat

In stock

Recommended usage 1 x GFK1124 to fit one mini.

997CC & 998CC Cooper Cylinder Head - Qty 2

Cylinder Head, 998CC, 'A' Plus 1980 on - Qty 2

Timing Cover & Tappet Inspection Cover - Qty 6

Clutch Housing - Qty 2

Water Pump, Pulleys & Ancillaries - Qty 4

Front Hydrolastic Displacer Suspension ( Known as - Qty 2

Steering Columns, Locks & Cowlings - Qty 1

Front drum Brakes DRY 1959-1964 ALL HYDROLAST - Qty 4

Camshaft and Timing Chain - Qty 2

Timing, side plate and rocker covers - Qty 6

Water Pump and thermostat - Pre 1996 Not MPI - Qty 4

Water Pump and thermostat from V134455 1275 MPI 96 - Qty 4

Emission, Carburettor Fittings and engine controls - Qty 1

Flywheel and Clutch - Qty 2

Clutch cylinders and flywheel case - Qty 1

Gearbox Transmission Case - Qty 10

Steering Wheels, Locks and Columns - Qty 1

Brake Master Cylinders, Valves and Servo - Qty 1

Brake Pipes - Front to Rear Split 1985 on - Qty 1

Bootlid - Qty 8

Bumpers and Number Plates - Qty 8

Front Rubber Cone Spring Suspension ( Known as Dr - Qty 8

Front Rubber Cone Spring Suspension ( Known as Dr - Qty 1

Front Suspension - Qty 8

Front Suspension - Qty 2

Front Door - Sliding window type - Qty 4

Front Door Glass, Channels, Catches and Regulators - Qty 8

Kit products

BUMPER & OVERIDER KIT 97on FRONT ONLY

DPZ100270

Specially designed for twin point injection cars. This kit has the 2 overiders and corner bars plus a stainless steel bumper with the pre stamped hole, plus fixings, for cars with 4 front driving lamps as fitted by Rover from 1997 on. Owing to the 4 ...

£137.42 exc vat

£164.90 inc vat

OVERIDER FITTING KIT FOR MK1

MSSK010

Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.

If you have standard overiders see kit MSSK011.

£12.14 exc vat

£14.57 inc vat

HEAT SHIELD STAINLESS STEEL KIT HS2 TWIN CARBS

MSSK1005

Stainless steel twin HS2 heatshields kit. Comes with link bar, bolts, nuts and springs.

£27.98 exc vat

£33.58 inc vat

HEAT SHIELD BLACK KIT HS4 TWIN CARBS

MSSK1004

Pair of heatshield brackets and cross bar

these are made similar to the original cooper HS2 design but ARE for HS4 (1.5")carbs and include the 3 correct springs that attach to the bridging bar for choke return linka...

£26.44 exc vat

£31.73 inc vat

HEAT SHIELD STAINLESS STEEL KIT HS4 TWIN CARBS

MSSK1006

Stainless steel twin HS4 heatshields kit. Comes with Link bar and springs.

£27.56 exc vat

£33.07 inc vat

FRONT OVERIDER & CORNER BAR KIT FOR MPi '97 on

MSSK027

This kit has 2 special overiders and 2 slightly shorter corner bars

for fitting to cars with 4 driving lamps when fitted as original equipment by the factory on all Twin point injection cars. This special kit was designed by Keith Dodd for ...

£68.62 exc vat

£82.34 inc vat

HEAT SHIELD BLACK KIT TWIN HS2

MSSK008

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

£26.47 exc vat

£31.76 inc vat

BUMPER KIT REAR ONLY MK1

MS26

The "Deluxe" models of all Minis included bumpers with these fancy over-riders and corner bars. This rear only kit is designed to provide you all the pieces; including, all the bits and the bumpers!

Includes bumper, the complete overrid...

£127.13 exc vat

£152.56 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

£3.50 exc vat

£4.20 inc vat

CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990

MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

£14.00 exc vat

£16.80 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

£29.52 exc vat

£35.42 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

£1.60 exc vat

£1.92 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

FRONT SUBFRAME ANCILLARY FIXINGS KIT

MSSK065

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

£33.30 exc vat

£39.96 inc vat

BOOT HINGE FITTING KIT

8B12602FK

Boot hinge gaskets and fittings for original type hinges

£3.69 exc vat

£4.43 inc vat

People also bought products

SPRING WASHER

WL700101

£0.06 exc vat

£0.07 inc vat

STARLOCK WASHER FOR MK3 DOOR HANDLE SCREW

WE702101

£0.08 exc vat

£0.10 inc vat

WASHER FOR BRAKE SERVO NON RETURN VALVE

11D5070

Washer for 17H2646ORIGINAL brake servo non return valve

£0.70 exc vat

£0.84 inc vat

WASHER 5/16" STAINLESS STEEL FLAT WASHER

GFK1114SS

£0.13 exc vat

£0.16 inc vat

SHAKEPROOF 3/16" WASHER

GHF320

Shakeproof star washer 3/16"unf sold individually-order quantity as required

£0.10 exc vat

£0.12 inc vat

WASHER PLAIN 3/16" 2bA x 3/8" OD FOR C-AJJ3381 BON...

WA1090

Plain washer 3/16" or 2BA.

£0.08 exc vat

£0.10 inc vat

SPRING WASHER 3/16"

GFK1123

SPRING WASHER 3/16" and 2BA.

£0.10 exc vat

£0.12 inc vat

WASHER FOR AIR FILTER BOLT

12A1437

Fibre washer to go under 12A1436 metal washer on the twin HS2 carb air cleaner. One required for HS4--sold singly order as required

£0.37 exc vat

£0.44 inc vat

OIL PRESSURE RELEASE VALVE COPPER WASHER

6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.36 exc vat

£0.43 inc vat

FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES

14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

£7.50 exc vat

£9.00 inc vat

SHAKEPROOF WASHER 1/4"UNF