FRONT SUBFRAME ANCILLARY FIXINGS KIT

MSSK065

£33.30 exc vat

£39.96 inc vat

In stock

This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.

£33.30 exc vat

£39.96 inc vat

In stock

Recommended usage 1 x MSSK065 to fit one mini.

Recommended products

SUBFRAME MOUNTING FRONT OF THE FRONT SUBFRAME NON...

21A2624MS

2 of these rubber mountings are fitted at the front of the front subframe on all vehicles from 1976 (mk4) on. To help stabilise steering by stopping subframe movement. We do many equivalents so see our accessory catalogue, also see 21A2624

£2.20 exc vat

£2.64 inc vat

SUBFRAME MOUNTING FOR REAR OF THE FRONT FRAME

21A2599MS

Priced each, 2 of these are fitted to the rear of the front subframe on all cars from 1976 on. These original rubber type can be replaced by alloy or other equivalents, see our accessory catalogue. Also see 21A2599 for genuine.

£2.38 exc vat

£2.86 inc vat

PACKING SPACER BETWEEN FRONT PANEL AND SUBFRAME

2A4292

Fitted to rubber mounted subframes from 1976 on this packing piece goes between the front panel and the subframe mounting points. You might be surprised how many of these were fitted to your car when it came out the factory. When replacing the front ...

£1.52 exc vat

£1.82 inc vat

TOWING EYE BOLT (FOR ROPE USE ONLY)

21A1241

Towing eye that fits in place of the bolt holding the front panel to the subframe. For stronger later version see KPU100160.

When using certain accessory tow bars make sure the towing eye is in the right position to suit or it w...

£5.85 exc vat

£7.02 inc vat

TOWING EYE HEAVY DUTY AS PER TWIN POINT CARS

KPU100160

Best to buy with 1 x PWZ207, 1 x GFK1115, 1 x GFK1126, 1 x GFK5195 to allow correct fitment. 3/8" bolt and washers except for PWZ207 which has 7/17" hole.

These are superior to...

£7.50 exc vat

£9.00 inc vat

FRONT SUBFRAME POLY MOUNT KIT 1976 ON

C-STR643

This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.

It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.

£16.00 exc vat

£19.20 inc vat

Kit contained products

GENUINE LOWER ARM SUSPENSION PIN

2A4362

Lower arm cross pin which holds the 2 rubber bushes is also available as an OE spec after market part as 2A4362MS.

See our special bushes for use when you have corrected the geometry on your car. C-STR631 and [link]...

£18.00 exc vat

£21.60 inc vat

TIE BAR BOLT

53K1031

Original Bolt with a special length shank for the front suspension tie bar to the lower arm. Always check this out for any signs of wear and replace accordingly.

Only wrong length parts were available in the market so these are the correct l...

£0.85 exc vat

£1.02 inc vat

TIE ROD/REAR SUBFRAME HEAVY DUTY FLAT WASHER

PWZ207

This is the correct thick flat washer for a suspension tie bar rod. The washer has a 7/16" hole is 1.5" wide. See 2A4328 for the correct dished washer.

£0.42 exc vat

£0.50 inc vat

SPRING WASHER 1/2"

GFK1128

£0.15 exc vat

£0.18 inc vat

NUT PLAIN 1/2" UNF

GFK3215

£0.12 exc vat

£0.14 inc vat

REBOUND BUFFER FIXING SCREW

13H2776

The correct screw for holding the 2A4267MS bump stop for the upper arm on the front suspension. 3/16"unf 1/2"long flat head phillips type screw.

£0.38 exc vat

£0.46 inc vat

FRONT SUSPENSION TIE BAR CUP WASHER

2A4328

Large cup retaining washer for the front suspension tie rod.

Sold singly 1 required per rod and 2 per car

£0.62 exc vat

£0.74 inc vat

BUMPER HANDLE BAR TO OVERIDER SHORT BOLT 1/4" x 3/...

GFK5179

Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

£0.13 exc vat

£0.16 inc vat

WASHER FOR SHOCK ABSORBER DAMPER

AJD7162

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

£0.22 exc vat

£0.26 inc vat

SPRING WASHER 1/4"