NUT PLAIN 5/16" UNF
GFK3212

£0.09 exc vat

£0.11 inc vat

In stockIn stock
Zinc plated 5/16" UNF plain nut

£0.09 exc vat

£0.11 inc vat

In stockIn stock

Recommended usage 1 x GFK3212 to fit one mini.
Cylinder Head Valve Sizes - Qty 3
Engine Components Cylinder Head - Qty 3
Clutch Housing - Qty 9
Gear Change Up to 1972 Not Rod Change - Qty 3
Rod Change Gear Shift Mechanism - Qty 1
Front Hydrolastic Displacer Suspension ( Known as - Qty 2
Rear Suspension, Hydrolastic - Qty 2
Timing, side plate and rocker covers - Qty 1
Water Pump and thermostat - Pre 1996 Not MPI - Qty 3
Engine Mountings - Qty 2
Engine Mountings - Qty 2
Clutch cylinders and flywheel case - Qty 9
Gearbox Transmission Case - Qty 3
Gearbox Transmission Case 2 - Qty 3
Gear Lever and Selector Mechanism - Qty 1
Gear Lever and Selector Mechanism - Qty 1
Exhausts for 998cc with HS4 and Cooper 1275 cc wit - Qty 7
Rear Brakes, Handbrake and Mechanism - Qty 6
Brake Master Cylinders, Valves and Servo - Qty 2
Front Subframe - Qty 2
Front Subframe - Qty 2
Engine Mountings & Brackets - Qty 4
Engine Mountings & Brackets - Qty 3
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 2
Front Suspension - Qty 2
Alternators and Starter - Qty 1
Alternators and Starter - Qty 1
Cylinder Head - Qty 4

Recommended products
WASHER PLAIN 5/16"
GFK1114

5/16" flat plain washer.

£0.06 exc vat

£0.07 inc vat
SPRING WASHER 5/16"
GFK1125

£0.11 exc vat

£0.13 inc vat
Alternative products
NUT PLAIN 5/16" UNF STAINLESS STEEL
GFK3212SS

5/16" UNF A2 Stainless Steel Plain nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

£0.29 exc vat

£0.35 inc vat
Kit products
RIGHT-HAND PETROL TANK FITTING KIT
MS82

Want to add a right-hand tank to your one-tank Mini? This kit includes everything, except the tank, to do it. Included are retaining straps, support brackets that mount to the rear seat back and boot floor, between tank metal fuel line and braided fu...

£73.17 exc vat

£87.80 inc vat
RC40 EXHAUST FITTING KIT
RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

£6.85 exc vat

£8.22 inc vat
LINKAGE KIT FOR MINISPARES WEBER INLET MANIFOLD
LINKAGE001

This is the kit supplied with our C-AHT772, C-AHT773 & C-AHT774 range of alloy inlet manifolds for the weber.

£33.18 exc vat

£39.82 inc vat
AMAL CARB KIT FOR 8-PORT HEAD
C-AJJ4083

Amal carburettor kit for the Arden 8-Port head. Complete with carbs, manifolds and linkage.

£1,474.29 exc vat

£1,769.15 inc vat
SERVO FITTING KIT
MSSK007

This kit includes all the parts to fit the 13H7939 (SEN43) Mk3 Mini servo. It includes all the parts supplied in the SEN43 servo kit (except the servo) but with the original type brackets rather than universal ones.

£51.69 exc vat

£62.03 inc vat
TWIN HS4 CARBURETTOR KIT - LESS AIR FILTERS
FZX3054

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

£1,159.23 exc vat

£1,391.08 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

£3.35 exc vat

£4.02 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

£14.00 exc vat

£16.80 inc vat
CLUTCH COVER AND CASE TO BLOCK BOLT KIT LESS GASKE...
MSSK062

Complete bolt kit to bolt the transfer case and clutch cover onto the engine block.

£25.10 exc vat

£30.12 inc vat
FRONT SUBFRAME BOLT FITTING KIT 1976 on
KGB10022FK

Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.

£14.46 exc vat

£17.35 inc vat
SUBFRAME FITTING KIT FOR PRE 76 FRONT DRY SUBFRAME
21A2570FK

Front subframe fitting kit for pre 76 twin bolt subframes, locktabs are included but not the subframe tower spacers as these rarely need changing.

£17.94 exc vat

£21.53 inc vat
ROD CHANGE GEAR LEVER CONVERSION BRACKET
MSSK053

Kit which enables you to fit a rod change gearbox to an earlier round tunnel.

£25.50 exc vat

£30.60 inc vat
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

£3.83 exc vat

£4.60 inc vat
SPI TO HIF44 CARB CONVERSION KIT
C-STN23

To convert a standard UK spec Single Point Injection car to HIF44 carb. This kit includes wiring looms,fuel tank,fuel pump, carb, air filter and inlet manifold.

£1,424.57 exc vat

£1,709.48 inc vat
.
MSSK4001

.

£1,055.76 exc vat

£1,266.91 inc vat
People also bought products
BOOT HINGE FITTING KIT
8B12602FK

Boot hinge gaskets and fittings for original type hinges

£3.69 exc vat

£4.43 inc vat
UPRATED FRONT DISC BRAKE HUB NUT
BTA249EVO

8 slot castle nut for disc brake CV joints. The extra slots make it easier to reach the factory torque setting.

£11.20 exc vat

£13.44 inc vat
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

£3.83 exc vat

£4.60 inc vat
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

£4.50 exc vat

£5.40 inc vat
CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON
346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

£0.69 exc vat

£0.83 inc vat
Mk1 WIPER MOTOR MOUNTS (THREE REQUIRED)
17H5431

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

£2.50 exc vat

£3.00 inc vat
NUT PLAIN 5/16" UNF STAINLESS STEEL
GFK3212SS

5/16" UNF A2 Stainless Steel Plain nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

£0.29 exc vat

£0.35 inc vat
NUT NYLOC 5/16" STAINLESS STEEL UNF
GFK3322SS

A2 Stainless Steel 5/16" UNF Nyloc nut, ideal for engine bay dress ups or nuts that you don't want going rusty!

£0.27 exc vat

£0.32 inc vat
NUT NYLOC 6mm METRIC M6
GFK3391

M6 metric lock nut -fits 14A6779ms bumper

£0.26 exc vat

£0.31 inc vat
5/16 UNF STAINLESS STEEL FLANGED NUT
FN605041SS

fits thermostat housing and manifold

£2.00 exc vat

£2.40 inc vat
PLAIN NUT 6mm METRIC M6
FS106047

Metric M6 PLAIN NUT.sold singly per item

Required for non genuine stainless steel and chrome bumpers.

Fits radiators with metric fittings such as ARP1110

£0.06 exc vat

£0.07 inc vat
NUT METRIC FLANGED M8
FN108047

METRIC FLANGED NUT AS USED ON ENGINE ANCILLARIES FROM 1990 ON

£0.55 exc vat

£0.66 inc vat
FLANGED M6 METRIC NUT
FN106047

Metric flanged metric M6 nut as used on engine, air con units and heaters from 1990 on.

£0.26 exc vat

£0.31 inc vat
METRIC NUT FLANGED M8 now FN108047
FN108041

METRIC M8 nut for holding bolt on spotlamp brackets on SPI/MPI plus other parts

£0.20 exc vat

£0.24 inc vat
NUT PLAIN 1/2 INCH UNF HALF NUT
NT608041

Plain half thickness half inch nut as used on our C-AJJ3365 arms and steering rack adjustment nut for track rod ends.

£0.16 exc vat

£0.19 inc vat
WINGNUT FOR COOPER & S AIR FILTER
12G2705

Wing nut to secure the air filter box on Cooper & Cooper 'S' models.

£7.50 exc vat

£9.00 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

£7.50 exc vat

£9.00 inc vat
SPORTSPACK WHEEL ARCH FLANGED FIXING NUT
FN105047

Original metric fixing nut for genuine Rover sportspack arches.

£0.28 exc vat

£0.34 inc vat
PLASTIC NUT ON DOOR FIXINGS
GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.



Also suitable for Twin Point indicator fixings.

£0.24 exc vat

£0.29 inc vat
NUT PLAIN 1/4" UNC
GFK3247

£0.03 exc vat

£0.04 inc vat