£0.70 exc vat
£0.84 inc vat
In stock
£0.70 exc vat
£0.84 inc vat
In stockRecommended usage 1 x 11D5070 to fit one mini.
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...
This special shake proof washer should be replaced. Found on front hose.
Also used on 21A1524 hydrolastic pipe adaptor.
Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.
1.4mm thick by 24.6mm wide.
Large cup retaining washer for the front suspension tie rod.
Sold singly 1 required per rod and 2 per car
If you have a van/estate or early mini sender unit in your petrol tank it will be held in by 6 screws 53K165 and these are the special copper washers that go on them. The cork gasket is GUG705711GM
For all sliding window models this washer sits against the chrome boss 14A8151 that hold the window catches.
Universal fibre washer mainly used on inlet manifold blanking plugs ADP210.
Concave washer for the CLZ549 pin on the quadrant of dry suspension minis.
This is the correct thick flat washer for a suspension tie bar rod. The washer has a 7/16" hole is 1.5" wide. See 2A4328 for the correct dished washer.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.