WASHER FOR PETROL TANK SCREW
2A2088

£0.41 exc vat

£0.49 inc vat

In stockIn stock
If you have a van/estate or early mini sender unit in your petrol tank it will be held in by 6 screws 53K165 and these are the special copper washers that go on them. The cork gasket is GUG705711GM

£0.41 exc vat

£0.49 inc vat

In stockIn stock

Recommended usage 6 x 2A2088 to fit one mini.

Recommended products

This round gasket has screw holes in to attach the early type saloon petrol sender tank unit to the tank and was used by all vans and estates right up until the end of production. Another use is for the window winder packing gasket CZH753

If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.

Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...

People also bought products

Petrol tank sender unit for early estate models 1960-61 approx with internal tank which is obsolete.

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

MPI 7.5 gallon tank has both pump and sender unit holes. Some people use this tank for turbo applications. This tank has the shorter neck with restrictor for lead free fuel nozzles as required by Japan and Germany and uses the thinner neck seal [link...

Non Genuine, fits saloons from 1974 until the introduction of injection.

First fitted to 1275GT in 1974 with 12"wheels and all mini saloons from 1980 on

7.5 gallons or 34 litres capacity and the tank is retained by the single stra...

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

Race spec aluminium fuel tank, foam filled 45 litre capacity, sight gauge, meets appendix K race regulations. Hand made in the UK!

Replacement screws and nylon inserts for the Van, Estate and Pick up petrol tanks.

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

Support bracket for the R/H, genuine Heritage part, can also use our own bracket 21A1329.

Shakeproof star washer 3/16"unf sold individually-order quantity as required

Gasket/seal for mounting the fuel pump to tank for SPI and MPI Mini's