PETROL TANK FOR MPI CARS ONLY-NON GENUINE
WFE106090MS

£192.00 exc vat

£230.40 inc vat

now

£182.40 exc vat

£218.88 inc vat

In stockIn stock
MPI 7.5 gallon tank has both pump and sender unit holes. Some people use this tank for turbo applications. This tank has the shorter neck with restrictor for lead free fuel nozzles as required by Japan and Germany and uses the thinner neck seal WGG100010 which should be used.

See WFE106090KIT for a full kit with pump and fuel sender

£192.00 exc vat

£230.40 inc vat

now

£182.40 exc vat

£218.88 inc vat

In stockIn stock

Recommended usage 1 x WFE106090MS to fit one mini.

Recommended products
FUEL TANK SENDER FUEL INJECTION CARS FROM 1992
XNB100380

Fuel tank sender unit for all injection cars. Requires ARA1502 seal.

£24.00 exc vat

£28.80 inc vat
PETROL TANK SEAL FOR FUEL LEVEL SENDER UNIT
ARA1502

Seal for Saloon petrol tank sender unit and the retainer clip is ARA1501. Early type tanks had 6 screws holding the sender unit in place and the gasket is GUG705711GM. .

£1.18 exc vat

£1.42 inc vat
PETROL TANK NECK SEAL MPI (FITS ALL)
WGG100010

This is the thinner type seal as used on the twin point injection cars and is usefull on earlier cars when fitting altenative petrol caps that require more of the neck exposed to allow fitment.

£1.60 exc vat

£1.92 inc vat
PETROL TANK RETAINER RING FOR SENDER UNIT SEAL
ARA1501

Saloon petrol tank retainer clip for the rubber seal on the sender unit which is ARA1502 .Early tanks had 6 screws holding the sender unit in place and used gasket GUG705711GM

£1.35 exc vat

£1.62 inc vat
Alternative products
PETROL TANK FOR INJECTION CARS
WFE106090

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however. This replaces the SPI tank WFE10401 but the neck is shorter on MPI models and the thinner neck seal [l...

£275.00 exc vat

£330.00 inc vat
PETROL TANK FOR SPI CARS ONLY-NON GENUINE
WFE10401MS

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however.

£192.00 exc vat

£230.40 inc vat
Kit products
COMPLETE MPI FUEL TANK KIT, WITH PUMP AND SENDER U...
WFE106090KIT

Complete kit for fitting an MPI tank, including tank, pump, sender and seals.

£374.93 exc vat

£449.92 inc vat
People also bought products
PETROL TANK SENDER UNIT SALOON (1959-1964)
2A2163

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

£40.00 exc vat

£48.00 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

£0.59 exc vat

£0.71 inc vat
CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON
346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

£0.69 exc vat

£0.83 inc vat
PETROL TANK FOR SPI CARS ONLY-NON GENUINE
WFE10401MS

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however.

£192.00 exc vat

£230.40 inc vat
GENUINE MINISPARES FUEL FILLER NECK GROMMET
14A7057GENUINE

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

£7.24 exc vat

£8.69 inc vat
SPRING HOSE CLIP FOR FUEL/RADIATOR HOSE
UKC3803

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

£0.95 exc vat

£1.14 inc vat
BRACKET LEFT HAND PETROL TANK SUPPORT
14A6867

Support for L/H petrol tank.

£16.00 exc vat

£19.20 inc vat
PETROL HOSE 8MM (5/16") INJECTION RATED SOLD IN 1M...
LPH631

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

£6.35 exc vat

£7.62 inc vat
GASKET PUMP TO FUEL TANK FOR SPI AND MPI MINI
EDP9317

Gasket/seal for mounting the fuel pump to tank for SPI and MPI Mini's

£20.70 exc vat

£24.84 inc vat
FUEL FILTER BRACKET - INJECTION CARS
WJU10142

If you've ever changed a fuel filter on an injection car you may have noticed you need to remove the whole bracket in order to remove the filter as the securing bolt is on the wrong side for good access, this is because the bracket was originally use...

£20.93 exc vat

£25.12 inc vat
FUEL PIPE FROM FILTER TO TANK - INJECTION CARS
WJP105860

Under floor short metal pipe from tank to filter on MPI injection from VIN WD169754---earlier cars and single point cars used WJP10209 pipe which had a different union which fitted GFE7059 fuel filter plus a union (WKB10019)...

£28.50 exc vat

£34.20 inc vat
MONZA CHROME PETROL CAP WITH COLLAR
SP228

This is a copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monz...

£16.50 exc vat

£19.80 inc vat
VENT PIPE PETROL TANK
CRC7575

Vent pipe from petrol tank

late cars were only 765mm or 31" approx, but Mk1 cars were 54"

£2.93 exc vat

£3.52 inc vat
FUEL PIPE FROM FUEL FILTER ON INJECTION CARS SPI/E...
WKB10018

Fuel pipe from the fuel filter to engine on spi and mpi models up to chassis no WD169574 when fuel filter GFE7059is fitted.



Tube nut has four threads, the metal pipe has a union on the end that is fatter than the metal...

£40.70 exc vat

£48.84 inc vat
PETROL PIPE VAN/ESTATE WITH MECHANICAL PUMP
21A308

Metal petrol pipe with tank union, this is for all estate and van versions with a mechanical pump where a long full length pipe is required. Made in non rust

metal.

£34.08 exc vat

£40.90 inc vat
PETROL TANK RETAINER RING FOR SENDER UNIT SEAL
ARA1501

Saloon petrol tank retainer clip for the rubber seal on the sender unit which is ARA1502 .Early tanks had 6 screws holding the sender unit in place and used gasket GUG705711GM

£1.35 exc vat

£1.62 inc vat
PETROL TANK NECK SEALING RING
2A2069

Sponge like cushioning seal for all minis between the tank neck and the body plus the minivan/estat/pickup petrol tank where it goes between and tank and the the floor/shroud.

£1.30 exc vat

£1.56 inc vat
PETROL TANK NECK SEAL MPI (FITS ALL)
WGG100010

This is the thinner type seal as used on the twin point injection cars and is usefull on earlier cars when fitting altenative petrol caps that require more of the neck exposed to allow fitment.

£1.60 exc vat

£1.92 inc vat
PETROL TANK R/H FUEL TANK 5.5 GALLONS
21A2183

Cooper S Right Hand Tank. Our new perfect fit and shape tank is now in stock. No unsightly "stretch" marks as seen on other tanks that are available, this is a perfect authentic item we are proud of. Approx 5.5 gallon.

See MS82 ...

£277.70 exc vat

£333.24 inc vat
HEX SCREW FOR VAN TANK PETROL SENDER UNIT
53K165

If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.

Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...

£0.59 exc vat

£0.71 inc vat