FUEL FILTER SPI/MPI UP TO VIN WD169573
GFE7059

£11.00 exc vat

£13.20 inc vat

In stockIn stock
From the introduction of fuel injection systems in 1992, a fuel filter was mounted on the rear subframe. These should be replaced every 2 years or 24,000 miles, whichever is the sooner.

GFE7059 covers all SPI models and MPI up to chassis nu...

£11.00 exc vat

£13.20 inc vat

In stockIn stock

Recommended usage 1 x GFE7059 to fit one mini.
Fuel rails and pipes - Qty 1

Recommended products

Fuel pipe from the fuel filter to engine on spi and mpi models up to chassis no WD169574 when fuel filter GFE7059is fitted.



Tube nut has four threads, the metal pipe has a union on the end that is fatter than the metal...

Under floor short metal pipe from tank to filter on MPI injection from VIN WD169754---earlier cars and single point cars used WJP10209 pipe which had a different union which fitted GFE7059 fuel filter plus a union (WKB10019)...

People also bought products

Fuel pipe from the fuel filter to engine on mpi models from chassis no WD169574 when fuel filter GFE7057 is fitted.



Tube nut has 7 threads and the metal pipe is the same size with a flared end.

From the introduction of fuel injection systems in 1992, a fuel filter was mounted on the rear subframe. These should be replaced every 2 years or 24,000 miles, whichever is the sooner.

GFE7059 covers all SPI models and MPI up to chassis nu...

Worthwhile fitment on any car and a must for performance engines. This filter has 1/4" ends for standard use, for 5/16" larger bore see PRO805. Supplied as per picture.

The new Filter king has been specially designed to provide a constant and steady flow of fuel under all driving conditions by means of a large and reactive membrane and the following claims are made. 7.9MM (5/16") FEED PIPES ONLY

prevents fu...

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy.The inlet and outlet unions are universal for either 1/4" or 5/16" hoses. The FPR004 is a glass dome version of the alloy bodie...

Oil filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter filter when optional oil cooler fitted or access tight through other modifications.

Minispares own 5 Litres of 20w50 Mineral Oil, See GUL7005T plus a MPI oil filter from original Unipart/Rover supplier, see MSF280

MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...

Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...

Minispares original filter fits all single and twin point injection models

sold at nearly half the retail price.

Minispares branded filter from the original and approved Rover/Unipart supplier until 2014

Minispares brand air filter element from the original approved and designated Rover/Unipart source.This air filter originated on the Metro range but was used from 1990 on any minis fited with a HIF type SU carbs that have the integral float bowl in i...

Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014. Original filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter fil...

Genuine Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014 when parts quality selection changed.

Same manufacturer and item as GFE443 but with our livery on so you know you are g...

Large air filter element for Mini with HS4 carb which is visible through the center of plastic filter case,also Austin America, MKIII Canadian

For the equivalent K&N cleanable element see E-2601.

Minispares product fro...

Short oil filter for MPI when space is restricted through modification or optional oil cooler fitted



MANN supplied Filter



this short filter DOES NOT fit the MPI block. it ONLY fits the oil cooler take off

Engine flush removes sludge and other unwanted deposits from oil galleries before new clean oil is added meaning the oil stays cleaner between changes. One bottle treats 4-6 litres of oil.

Billet oil filter housing for engines with 12A prefix-Uses 88G402 gasket.

The original is no longer available but this is an upgraded version to stop flexing and cracking especially sort after by racers.

Should be used ...

Bock to filter union that the oil filter screws on to for 1997 twinpoint Mini's

pair of socks for rampipes on carbs. These should be fitting dry, no oil required.