FILTER KING FUEL PRESSURE REGULATOR BY FACET 67MM ...
FPR004

£58.98 exc vat

£70.78 inc vat

In stockIn stock
This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy.The inlet and outlet unions are universal for either 1/4" or 5/16" hoses. The FPR004 is a glass dome version of the alloy bodied FPR005. Should be used on all facet pumps.

Also see FPR006 new larger 85mm glass bowl filter.

£58.98 exc vat

£70.78 inc vat

In stockIn stock

Recommended usage 1 x FPR004 to fit one mini.

Alternative products

The new Filter king has been specially designed to provide a constant and steady flow of fuel under all driving conditions by means of a large and reactive membrane and the following claims are made. 7.9MM (5/16") FEED PIPES ONLY

prevents fu...

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy. The inlet and outlet are 5/16". The FPR004 is a glass dome version of the alloy bodied FPR005. should be used on all facet pum...

People also bought products

Fuel pipe from the fuel filter to engine on mpi models from chassis no WD169574 when fuel filter GFE7057 is fitted.



Tube nut has 7 threads and the metal pipe is the same size with a flared end.

From the introduction of fuel injection systems in 1992, a fuel filter was mounted on the rear subframe. These should be replaced every 2 years or 24,000 miles, whichever is the sooner.

GFE7059 covers all SPI models and MPI up to chassis nu...

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy. The inlet and outlet are 5/16". The FPR004 is a glass dome version of the alloy bodied FPR005. should be used on all facet pum...

Worthwhile fitment on any car and a must for performance engines. This filter has 1/4" ends for standard use, for 5/16" larger bore see PRO805. Supplied as per picture.

The new Filter king has been specially designed to provide a constant and steady flow of fuel under all driving conditions by means of a large and reactive membrane and the following claims are made. 7.9MM (5/16") FEED PIPES ONLY

prevents fu...

A kit to convert the early style cartridge oil filter to the later style spin on filter.

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

This is the large seal for the early type oil filter assembly pre spin on type.

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

Non Genuine, fits saloons from 1974 until the introduction of injection.

First fitted to 1275GT in 1974 with 12"wheels and all mini saloons from 1980 on

7.5 gallons or 34 litres capacity and the tank is retained by the single stra...

Non Genuine reproduction tank fits all the long wheel base Minis, except for the very early side-tank travellers. Also used on many kit cars and specials owing to its shape.

Because of the outside location of these tanks, the originals seem ...

Non-genuine version of the choke cable fitted to the early minis which does

not lock into place like the twin carb version. (see 21A1204).



It was made to work with the single HS2 carb and had only the word "CH...

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...

Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...

Minispares original filter fits all single and twin point injection models

sold at nearly half the retail price.

Minispares branded filter from the original and approved Rover/Unipart supplier until 2014