OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

£0.36 exc vat

£0.43 inc vat

In stockIn stock
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will probably be stuck, requiring encouragement to come out. Briefly cranking the engine over will usually free the plunger; in severe cases a thread tap can be screwed in to grip the plunger from the inside to draw it out. Now throw away the aluminum plunger and replace it with a steel ball (BLS916). The harder ball will never become galled or pitted and therefore won't get stuck. This spring (6K858) and ball assembly should give you a steady 75 PSI @ high RPM. To prevent oil leaks, it is always a good idea to replace the copper washer (6K431) under the domed nut.

£0.36 exc vat

£0.43 inc vat

In stockIn stock

Recommended usage 1 x 6K431 to fit one mini.
Oil Pump / Pressure Valve, Dipsticks - Qty 1
Oil Pumps, Filters and Coolers - Qty 1

People also bought products
OIL PRESSURE RELIEF BALL COOPER S TYPE
BLS916

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.60 exc vat

£0.72 inc vat
OIL PRESSURE RELIEF VALVE SEATING
2A797

The seating in the block that the 12H865 oil pressure release valve sits in, when fitting the end with the slight taper goes into the block first.

Tapped M8 to make removal from the block easy. We recommend that you leave the ol...

£10.40 exc vat

£12.48 inc vat
OIL PRESSURE SPRING CAP NUT
12A1851

The oil pressure relief valve cap on the front of A series.

£6.75 exc vat

£8.10 inc vat
OIL PRESSURE RELEASE BALL AND SPRING
AEA536KIT

Oil pressure relief valve ball and spring kit. Cooper S upto 1971. Can be retro fitted to all minis to boost oil pressure.

£1.55 exc vat

£1.86 inc vat
OIL PRESSSURE VALVE AND SPRING
6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£3.15 exc vat

£3.78 inc vat
OIL PRESSURE SPRING ORIGINAL COOPER "S"
AEA536

Oil pressure relief valve spring for Cooper S 1961 to 1971.

£1.05 exc vat

£1.26 inc vat
OIL PRESSURE RELIEF VALVE STANDARD SPRING
6K853

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.75 exc vat

£0.90 inc vat
BOOT HINGE FITTING KIT
8B12602FK

Boot hinge gaskets and fittings for original type hinges

£3.69 exc vat

£4.43 inc vat
CRANK THRUST WASHER SET 998 3 THOU OVERSIZE
ACL2122-003

Crankshaft washers for crankshaft at 3 thou oversize on each one

sold as a set of four for 998 and 1100cc.

£17.25 exc vat

£20.70 inc vat
GEARBOX TO BLOCK STEPPED WASHER FOR CORNER BOLT
22A1150

£4.80 exc vat

£5.76 inc vat
GEARBOX TO BLOCK LOCATING DOWEL (HOLLOW)
12H1824

£4.80 exc vat

£5.76 inc vat
CRANK THRUST WASHER SET STANDARD 998
ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat
PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...
AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.



this fits engines using the early egg shaped cover



This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

£24.75 exc vat

£29.70 inc vat
AC DODD ROAD SPORT CAM
ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.



Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

£214.40 exc vat

£257.28 inc vat
AC DODD STANDARD CAMSHAFT
ACD-OE

Standard replacement factory camshaft. Please picture for cam specs.





AC Dodds version of a stock factory cam, the Original equipment replacement camshaft. This is also an excellent economy cam. Perfect for that standard r...

£214.40 exc vat

£257.28 inc vat
ACL SMALL BORE ENGINE CAM LINER SET
ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat
FORGED STEEL CONROD SET 6"LONG 1.625 JOURNAL 18MM ...
C-AEG625EVO

Minispares steel connecting rods are machined by Arrow Precision Eng from double air re-melted 817M40 forgings to X condition. \weight 442g

The new X rod design maintains stiffness whilst reducing weight where it is not required. ARP 2000 5/...

£1,155.00 exc vat

£1,386.00 inc vat
PISTON RING SET 998/1100 +60
C1072-60

Steel ring set, 3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£44.80 exc vat

£53.76 inc vat
PISTON RING SET 998/1100 STD
C1072-00

Steel ring set,for 4 ring pistons. 3 compression rings @ 0.0625" oil rings 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£35.20 exc vat

£42.24 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat