PISTON RING SET 998/1100 STD
C1072-00

£35.20 exc vat

£42.24 inc vat

In stockIn stock
Steel ring set,for 4 ring pistons. 3 compression rings @ 0.0625" oil rings 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£35.20 exc vat

£42.24 inc vat

In stockIn stock

Recommended usage 1 x C1072-00 to fit one mini.

Alternative products
PISTON RING SET 998/1100 STD
R32026-00

3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£58.32 exc vat

£69.98 inc vat
People also bought products
PISTON RING SET FOR 21253 PISTON
R41570-00

3mm OIL RING with compression ring size .0591" (1.5mm)and one piece oil ring .1181" (3mm)on p21253 pistons giving 9.7cr on 1275cc. std ring size

For performance see steel ring set with 3 piece oil ring as favoured by engine builders[link]C1...

£70.32 exc vat

£84.38 inc vat
PISTON RING SET FOR 21253
R41570-20

3mm OIL RING with compression ring size .0591" (1.5mm)and one piece oil ring .1181" (3mm)on p21253 pistons giving 9.7cr on 1275cc. 20 thou oversize

For performance see steel ring set with 3 piece oil ring as favoured by engine builders[link]...

£70.32 exc vat

£84.38 inc vat
CRANK THRUST WASHER SET STANDARD 998
ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat
ACL SMALL BORE ENGINE CAM LINER SET
ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat
CRANK THRUST WASHER SET +0.30" 1275
ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat
TIMING CHAIN SINGLE ROW SPECIAL QUALITY
3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

£22.05 exc vat

£26.46 inc vat
CRANK THRUST WASHER SET STANDARD 1275
ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat
KENT 246 PROFILE CAMSHAFT METRO DRIVE
MDM246

Supplied to order. Truly a lovely road going camshaft with a little more torque and oomph originally than SW5 or EVOLUTION002 and now over shadowed by so many alternatives these days. With 252 duration on inlet and exhaust-same as SW5.

£225.60 exc vat

£270.72 inc vat
ENGINE TO GEARBOX NUT AND BOLT KIT
MSSK060

Complete nut, bolt and washer set for engine to gearbox only

£3.50 exc vat

£4.20 inc vat
WATER PUMP FITTING KIT FOR GWP134 AND GWP132
GWP134FK

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

£8.00 exc vat

£9.60 inc vat
BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat
SIMPLEX TENSIONER 6 PIECE KIT
MSSK051

Parts required to stop timing chain rattle on A plus engine with single row chain.Last chance to buy the plate and pin to hold the tensioner as they are

obsolete from Rover.

It is worth the expence to fit MSSK051EVOkit...

£21.06 exc vat

£25.27 inc vat
MAIN CAP DOWEL EXCEPT 1300
2A54

Dowel for the main cap on small bore engines, large bore engines use 12G1268.

£1.52 exc vat

£1.82 inc vat
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.36 exc vat

£0.43 inc vat
GEARBOX STABILISER R/H KIT
MSSK

Lower Stabilizer Kit, RH.

Designed as an almost mandatory addition to any Mini with a rod change transmission, extra stabilizers will greatly aid any car. In stock form the control is left to the upper stabilizer. This often results in not o...

£23.14 exc vat

£27.77 inc vat
CAMSHAFT 998cc-1380cc A PLUS FAST ROAD/ best teste...
EVOLUTION001

Genuine Mini Spares camshaft,great for all road uses- A Plus slot drive only.

Valve clearance should be 0.014" on inlet and 0.016" exhaust. LCA 107 degree

DURATION INLET 264 EXHAUST 268, LIFT INLET 264 EXHAUST 289.

This ca...

£82.50 exc vat

£99.00 inc vat