BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£28.02 exc vat

£33.62 inc vat

BIG ENDS PLUS 30 OVERSIZE 998/1100 COOPER S

AEB572-30

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£22.96 exc vat

£27.55 inc vat

CRANKSHAFT WOODRUFF KEY

6K836

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

£4.98 exc vat

£5.98 inc vat

BIG END SET 10 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-10

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£28.50 exc vat

£34.20 inc vat

BIG ENDS PLUS 20 OVERSIZE 998/1100 COOPER S

AEB572-20

Con rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£32.00 exc vat

£38.40 inc vat

BIG ENDS SET STANDARD 1275 EXCEPT COOPER S

AEB91306-00

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£28.50 exc vat

£34.20 inc vat

FLYWHEEL KEYWAY - PRE VERTO (MADE IN EN24T STEEL)

88G508

Made in EN24T for strength they have been made to fit the majority of flywheels that seemed to slightly differ from the mid 60s. Run a file down the raised keyway if tight. This flywheel locking plate is for pre verto diaphragm clutches. For Verto ty...

£8.63 exc vat

£10.36 inc vat

PRIMARY GEAR FRONT FLOATING BUSH 1275cc

C-AEA3240

This is our racers favourite way of dealing with the worn or troublesome front primary gear bush.(this is NOT the top hat type rear bush)22.5mm wide. Racers and professional engine builders will use their own tolerances but these are set for road use...

£18.15 exc vat

£21.78 inc vat

BIG ENDS STANDARD 998/1100 COOPER S

AEB572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road car.

( Tri-Metal )

Sintered copper lead, lead...

£28.50 exc vat

£34.20 inc vat

CON ROD BOLT SET 1275cc NOT "S" ARP NUT/BOLT SET

C-STR289

These con rod bolt and nut set are made by ARP in the USA and considered the best available FITS 1300 con rods plus MGB late 18V engine numbers with 11-32" bolts. Quantity required one kit per car. torque up to 38-40lb ft.

£120.00 exc vat

£144.00 inc vat

CRANKSHAFT 81.3 METRO/1300 MAINS 1.625 "S" BIGENDS

C-STR932

Forged EN40B steel Race crank for the 1300 solid wall block with the main width of 1.211" but has 1.625" big end journals sizes as per the original Cooper S.

All cranks have been re drawn to benefit from latest technology by having the lar...

£2,286.40 exc vat

£2,743.68 inc vat

BIG ENDS PLUS 10 OVERSIZE 998/1100 COOPER S

AEB572-10

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead, le...

£31.20 exc vat

£37.44 inc vat

LOCKTAB BIG ENDS ON CRANKSHAFT EXCEPT 1275

2A660

LOCKTAB FOR CON ROD BIG END BOLTS ON SMALL BORE A SERIES ENGINES.

£1.12 exc vat

£1.34 inc vat

PRIMARY GEAR BACKING RING 2 thou thicker

88G549

Genuine Mini Spares product. Spacer fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear. Now made 2 thou oversize to help corect wear issues.

Only f...

£14.70 exc vat

£17.64 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

£214.40 exc vat

£257.28 inc vat

PISTON RING SET 998/1100 STD

C1072-00

Steel ring set,for 4 ring pistons. 3 compression rings @ 0.0625" oil rings 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£35.20 exc vat

£42.24 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

£3.00 exc vat

£3.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat