ENGINE BUILD LUBE TORCO.4 Oz

Favoured by proffessionals for press fitting pistons, pre lubing bushes, roller and plain bearings, journals and gears. Prevents scuffing, seizure, wear, rust. Waterproof and corrosion proof.

£10.88 exc vat

£13.06 inc vat

MAINS SET 30 OVERSIZE 1275 A PLUS ONLY 3 SIDE TAG ...

AEM91886-30

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

£44.28 exc vat

£53.14 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

CRANK THRUST WASHER SET +0.30" 1275

ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

MAINS SET +10 PRE A PLUS/EARLY A+ 1275 ACL

C-AEM91120-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£74.51 exc vat

£89.41 inc vat

BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE

C-AEB91306-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£71.69 exc vat

£86.03 inc vat

BIG END SET 60 OVERSIZE 998/1100 COOPER S

AEB572-60

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a road motor.

( Tri-Metal )

Sintered copper lead, lea...

£29.70 exc vat

£35.64 inc vat

CRANK THRUST WASHER SET STANDARD 1275

ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat

CAM LINER SET 1275

ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

MAIN JOURNAL SET STD SIZE 1275cc Pre A Plus

VM1004-00

Mahle RACE quality std size main bearings for Pre A Plus 1275cc as used by competition engine builders.Quantity required-1 set.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the UK...

£90.00 exc vat

£108.00 inc vat

CON ROD JOURNAL SET STD 1.625" 998/"S"

VC1017-00

Mahle RACE quality std size shells as used by competition engine builders.

For 1.625" big ends on 998 and Cooper S.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the UK. Th...

£91.35 exc vat

£109.62 inc vat

BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat

BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S

AEB572-40

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£28.02 exc vat

£33.62 inc vat

BIG ENDS PLUS 30 OVERSIZE 998/1100 COOPER S

AEB572-30

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£22.96 exc vat

£27.55 inc vat

CRANK THRUST WASHER SET 1275 30 THOU OVERSIZE

VPW41-030

Set of +.030 thrust washers for 1275.Very useful for machining down when fitting non S cranks in 1275cc block

£14.00 exc vat

£16.80 inc vat

CRANK THRUST WASHER SET 1275

VPW41

Set of std VP thrust washers for 1275.

£14.25 exc vat

£17.10 inc vat

MAIN CAP DOWEL EXCEPT 1300

2A54

Dowel for the main cap on small bore engines, large bore engines use 12G1268.

£1.52 exc vat

£1.82 inc vat

MAINS 998/1100+20 PRE A PLUS-MAHLE WAS VANDERVELL

VP733-20

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 20 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide...Quantity required-1 set.

£30.00 exc vat

£36.00 inc vat