ENGINE CAM/OIL PUMP LUBE.1 Oz

Converted into a non melting type grease.Favoured by proffessionals for camshaft,lobes and lifter,and any valvetrain to stop scuffing on start up. Also useful for oil pumps to stop drain back on start up

£6.45 exc vat

£7.74 inc vat

TIMING DISC 360°

C-AJP337

A vital aid for accurate valve timing this disc is a 360 degree protractor disc made by kent cams.

£9.60 exc vat

£11.52 inc vat

4° OFFSET WOODRUFF KEY

WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

2° OFFSET WOODRUFF KEY

WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

3° OFFSET WOODRUFF KEY

WKN3OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

CAMSHAFT PERFORMANCE SPI ONLY-NOT MPI on new blank

MDM274

The only upgrade in camshaft you can get away with on the single point injection cars without changing ECU etc--A mild road cam

As of July 2007 Kent cams have no supply of old camshafts for reprofiling and we will only supply camshafts fro...

£225.60 exc vat

£270.72 inc vat

5° OFFSET WOODRUFF KEY

WKN5OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat

ENGINE CAM/OIL PUMP LUBE.1 Oz

KCLUBE1

Converted into a non melting type grease.Favoured by proffessionals for camshaft,lobes and lifter,and any valvetrain to stop scuffing on start up. Also useful for oil pumps to stop drain back on start up

£6.45 exc vat

£7.74 inc vat

DUPLEX CHAIN AND GEAR SET LIGHTENED AE CAST .NOT F...

C-AJJ3324

Lightened cam gear duplex timing gear and chain set. Not recommended for race/rally applications. approx 69-70g 9% lighter

General: Camshaft Drive Systems

For highly tuned engines always use steel duplex as cast is nowhere as st...

£38.49 exc vat

£46.19 inc vat

CHILLED IRON CAM FOLLOWER WITH OIL HOLE

AEG584

Standard weight, 44.00grams, follower with oil drain hole. Always check for wear and replace whenever a new camshaft is fitted. These are manufactured by the supplier to AE Hepolite the original engine components manufacturer and should be coated wit...

£3.60 exc vat

£4.32 inc vat

CAMSHAFT GEAR LOCKTAB

2A759

If you are replacing your timing chain or just doing routine maintenance a new locktab is sure to come in handy.

£0.52 exc vat

£0.62 inc vat

REPLACEMENT BELT FOR TIMING BELT DRIVE KIT -

BELTBELT

Timing belt camshaft drive systems have been around for a number of years, in fact for a lot longer than the life expectancy of the belts. If you have a belt drive conversion you should have one of these replacement belts. If you want to keep things ...

£37.50 exc vat

£45.00 inc vat

DUPLEX VERNIER ADJUSTABLE STEEL GEAR SET

C-AJJ3327

Adjustable cam gear set with non stretch chain. Cam gear weighs 674g

Even a stock camshaft needs to be timed correctly. If you want to get the maximum benefit from a "hot" cam it is doubly important that the cam timing be correct. This adju...

£88.00 exc vat

£105.60 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

£9.75 exc vat

£11.70 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

£299.00 exc vat

£358.80 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat

BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE

C-AEB91306-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£69.06 exc vat

£82.87 inc vat