CAST EXHAUST MANIFOLD CLAMP FOR 1990 ON 1275 CARB ...
GEX7801CAST

£10.50 exc vat

£12.60 inc vat

In stockIn stock
A more robust cast version on GEX7801.



Twin Down pipe clamp for Carb Coopers 1990 on wards, and Metro's.

Also used as a single clamp on manifold for cars fitted with HIF38 carb cars from 1991 on.

£10.50 exc vat

£12.60 inc vat

In stockIn stock

Recommended usage 2 x GEX7801CAST to fit one mini.

People also bought products
CAST IRON MANIFOLD TO DOWNPIPE CLAMP
GEX7046CAST

Exhaust manifold to downpipe clamp. For 32mm o/d pipe size.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These cast clamps are the best style to use. A real piece of kit to use eradicating a multitude of likely p...

£7.20 exc vat

£8.64 inc vat
MANIFOLD GASKET FOR FUEL INJECTED CARS
GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.


...

£5.10 exc vat

£6.12 inc vat
MANIFOLD CLAMP FLAT TYPE 48mm 1.875"
C-AHT121

For the medium bore Maniflow LCB Y piece or AN180V. 48mm ID

£4.50 exc vat

£5.40 inc vat
MANIFOLD GASKET INLET / EXHAUST
AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

£0.96 exc vat

£1.15 inc vat
LINK PIPE TO REPLACE CATALYTIC CONVERTER
C-ARA664

If you wish to delete the catalyst (legal restrictions apply, so check to see if you are allowed) this pipe is specially made to replace it.

£32.99 exc vat

£39.59 inc vat
MANIFOLD NUT/WASHER. 1990 on
LYH10008

The newest development in the A-series engine is the use of these nuts with swedged-on washers. The washer will not separate from the nut, so you won't lose it. Yet the nut rotates independently while you tighten it. What a great idea.

£3.68 exc vat

£4.42 inc vat
MANIFOLD NUT SHORT BRASS 5/16" UNF
GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat
EXHAUST DOWN PIPE WHEN HIF38 CARB EXCEPT AUTO
GEX12052

downpipe from the exhaust manifold on the petrol 1275cc Ritz and Italian Job mini 1991/3 which had the 1.5" HIF38 carb. The automatic version of this down pipe is GEX12054

£28.50 exc vat

£34.20 inc vat
MANIFLOW SIDE EXIT 1.75" SINGLE BOX EXHAUST SYSTEM
C-ARA331SB

Standard larger 1.750" bore single box exhaust system for saloons.

see C-ARA339 for van and pickups.

£90.63 exc vat

£108.76 inc vat
BLANKING PLUG FOR LAMBDA SENSOR HOLE
MYB100040

Blanking plug to blank of the Lambda sensor hole on all SPI/MPI models.

£2.63 exc vat

£3.16 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

£1.22 exc vat

£1.46 inc vat
CATALYTIC CONVERTER NUT M10 METRIC
NV110051

THE M10 METRIC NUT THAT SCREWS ON THE THREAD BOLTS OF THE CATALYLITIC CONVERTER

£0.61 exc vat

£0.73 inc vat
EXHAUST MIDDLE MOUNTING
GEX7081

Middle exhaust mounting, bolts on to the front of the rear subframe and is the central or first of the rubber mountings. see GEX7081POLY for Poly type or if you are fed up with breakages see C-19G3257.The original Genuine pa...

£1.60 exc vat

£1.92 inc vat
EXHAUST MANIFOLD CLAMP FOR 1990 ON 1275 CARB MINI
GEX7801

Twin Down pipe clamp for Carb Coopers 1990 on wards, and Metro's.

Also used as a single clamp on manifold for cars fitted with HIF38 carb cars from 1991 on.

£2.95 exc vat

£3.54 inc vat
DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...
RC40-001

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

£8.88 exc vat

£10.66 inc vat
RC40 REAR BOX AND PIPE FROM CATALYST BACK
C-STR811

Rear RC-40 fitted with a pipe to bolt straight on to the catalyst for cars built late 1991 onwards (not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a single box system with a little throat...

£61.00 exc vat

£73.20 inc vat
REAR COTTON REEL EXHAUST MOUNT
GEX7251

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required.

See C-19G3258 for larger upgrade...

£1.05 exc vat

£1.26 inc vat
GASKET FOR EXHAUST CATALYTIC CONVERTER
GEX7761

Metal gasket for the catalyst and is the same both ends for Cooper 1275CC RSP early cars, but only fitted on the front to later cars. If you cannot fit this gasket on the rear your car does not need one.

£0.67 exc vat

£0.80 inc vat
EXHAUST REAR BRACKET FOR GEX177 ETC
GEX7084

The very rear hanger for mini saloon exhausts pre 1990.

This bracket slides on after the rear silencer and hangs straight up to the cotton reel mounting but never comes on a new exhaust. It is always prone to breaking if the engine rocks bad...

£1.45 exc vat

£1.74 inc vat
EXHAUST RUBBER MOUNTING FROM 1990 ON
DBP7104

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

£3.00 exc vat

£3.60 inc vat