HEAD GASKET SET 1275cc HIF38 CARB version
GUG701114HS

£28.59 exc vat

£34.31 inc vat

Out of stockOut of stock
genuine head gasket set for minis with 1275cc engine from 1990-94 with HIF38 or

HIF44 carb and a reinforced manifold gasket. see GUG701186 also which was for HIF44 carb with standard manifold gasket. Use AJM1140MS and if you have the HIF38 carb you will require GUG705559GM carb to elbow gasket

£28.59 exc vat

£34.31 inc vat

Out of stockOut of stock

Power Unit Gasket Sets 1959-2000 - Qty 1

Alternative products
HEAD GASKET SET WITH GEG300 COPPER HEAD GASKET 127...
AJM1141MS

Same contents as AJM1140MS but with the super GEG300 performance Copper type head gasket substituted for the standard copper type.

This is the best copper non asbestos type head gasket available and used by top tune...

£25.43 exc vat

£30.52 inc vat
HEAD GASKET SET WITH STD COPPER HEAD GASKET 1275cc
AJM1140MS

Mini Spares gasket set contains the following gaskets: copper head gasket, manifold, rocker cover, heater valve, 2x thermostat, 3x HS4 carb to manifold, 6x HS2 carb to manifold, 2xHS2 carb to aircleaner, 3x hif carb to manif...

£15.70 exc vat

£18.84 inc vat
People also bought products
TURBO MANIFOLD GASKET WITH EXHAUST INSERTS
GUG704063MG

Made especially for turbos to stop leakage and heat problems this gasket has metal ring retainer inserts on the exhaust ports. Sold singularly.

£12.68 exc vat

£15.22 inc vat
ORIGINAL SHAPE THERMOSTAT HOUSING GASKET
GTG101MS

Forget all the universal shape gaskets available - this is the original correct shape made out of thick gasket paper.

£0.28 exc vat

£0.34 inc vat
BY PASS HOSE ADAPTOR. LONG LATER TYPE ON CYL HEAD
12A2075

This is the longer type cylinder head adaptor tube which allows fitment of the by pass hose without removing the head. The shortened hose GZA2083 slides up the tube and then back down on the water pump tube. Frequently rusted on old head...

£5.20 exc vat

£6.24 inc vat
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.36 exc vat

£0.43 inc vat
OIL PRESSURE RELIEF BALL COOPER S TYPE
BLS916

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.60 exc vat

£0.72 inc vat
VACUUM PIPE ELBOW
12B2062

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

£2.25 exc vat

£2.70 inc vat
CONNECTOR FOR ADVANCE RETARD VACUUM PIPE
12B2095

Straight rubber connector pipe. The standard vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could a...

£0.90 exc vat

£1.08 inc vat
DASHPOT COVER RED HIF
R24RED

brighten up your engine bay area with these bright alloy carb covers --these fit HIF type carbs only- see R22BLUE and R22 for chrome look

£12.89 exc vat

£15.47 inc vat
OIL PRESSURE RELIEF VALVE STANDARD SPRING
6K853

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

£0.75 exc vat

£0.90 inc vat