brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22BLUE and R22 for chrome look

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

Brighten up your engine bay with these bright alloy carb covers. These fit HS2 1.25" type carbs only- see R22BLUE and R22RED

A very usefull tuning needle for single and twin carbs when camshaft change for carbs with floating needles.

Correct and original thickness oil for SU carb dashpots.

Throttle return springs for all twin carb variants. Usually 3 fitted.

This is the right hand linkage lever taht sits on the rods between HS type twin carbs. Sold individually

The spacer block for between manifold and HS2 single carbs and use 1G2624 gaskets (3 of).

Locating rings originally made for 12G295 heads with twin carbs to line up the inlet manifold to the inlet ports on the cylinder head it found its way on most twin carb factory produced cars. There is a recess in the inlet port on the he...

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...