AIR DUCTING FROM AIR CLEANER TO MANIFOLD
LKM10002

£3.19 exc vat

£3.83 inc vat

In stockIn stock
Air ducting tube from inlet manifold to air cleaner. These are 3" long as the length supplied by Rover for HIF carb use. Alternative is 12H4333 5.5" long which covers the longest length used on the HS4 carb range but some such as the injection model used only 1.5" OR 2-2.5"long hose.

£3.19 exc vat

£3.83 inc vat

In stockIn stock

Recommended usage 1 x LKM10002 to fit one mini.
Air Cleaner - Qty 1
Air Cleaners - Qty 1

Alternative products

Air ducting tube from inlet manifold to air cleaner. These are 5.5" long which covers the longest but some such as the injection model is only 1.5" OR 2-2.5" long.

People also bought products

Minispares brand air filter element from the original approved and designated Rover/Unipart source.This air filter originated on the Metro range but was used from 1990 on any minis fited with a HIF type SU carbs that have the integral float bowl in i...

Large air filter element for Mini with HS4 carb which is visible through the center of plastic filter case,also Austin America, MKIII Canadian

For the equivalent K&N cleanable element see E-2601.

Minispares product fro...

Yes, air filter elements should be replaced-about once a year or more often with a lot of rural miles. If your engine runs better without the filter its well past time for a new one. This is the same 37mm high element that fits single HS2

Air ducting tube from inlet manifold to air cleaner. These are 5.5" long which covers the longest but some such as the injection model is only 1.5" OR 2-2.5" long.

Just what injection engines require, this element will increase the breathing

to the engine which can only result in better performance all round. Once fitted these special elements can last nearly a life time if cleaned and oiled regularly ...

Better flowing replacement air filter for single 1.25" SU and use 2 for twin SU 1.25" carbs. Item sold per filter-one required for single HS2 carb and two for twin carb set up cars. Does not fit mk3 S air boxes as they are shallower.

Sticker for the front edge of the twin carb air cleaner case. All Cooper and S models used this type.

The stock air cleaner housing for many Minis with single 1 1/2" SU carbs have historically been stuck with the paper filter. New from K&N is a replacement element for FZX3013 and all HIF that provides the benefits of K&N cleanable filtra...

Wingnut to secure air box to carb / carb elbow.

Suitable for single HS4 , HIF38 type plastic air box.



Not for Cooper S twin carb type metal air box. Cooper S type use 12G2705, a shorter version.

MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...

Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014. Original filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter fil...

Genuine Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014 when parts quality selection changed.

Same manufacturer and item as GFE443 but with our livery on so you know you are g...

Engine flush removes sludge and other unwanted deposits from oil galleries before new clean oil is added meaning the oil stays cleaner between changes. One bottle treats 4-6 litres of oil.

Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.

Worthwhile fitment on any car and a must for performance engines. This filter has 1/4" ends for standard use, for 5/16" larger bore see PRO805. Supplied as per picture.

Minispares own 5 litres of 20W50 mineral oil, see GUL7005T plus a spin on oil filter pre 1996 from the original supplier to Rover/Unipart, see MSF166

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a bui...

Universal crank case breather with chrome top and a 13mm(1/2")neck size.

2"wide top (50mm) and 35mm high

To get the maximum benefit of K&N filters they should be cleaned periodically.

"Recharger filter care service kit" by K&N; a six step maintenance system to recharge your K&N Filtercharger air filter. Completely restores air flow efficiency ...