WHEEL ARCH SET 2.25" WIDE PROFILE SUPERFIT
MS133MS

£86.10 exc vat

£103.32 inc vat

In stockIn stock
Ultimate Wheel arch flares of choice if PREMIER quality of looks and FITTABILITY is the prime objective. The "WP" Wide profile style fibreglass flares not only look smooth and sleek but will cover most 10"-12" wheels of your choice.

Many flares have to be blended in, but this design of arch which is similar to the original 1960 Wood & Picket type do not. Updated on fitability from new moulds that allows for easy installation with screws that cannot be seen from the top or side. Supplied with sealing strip for upper edges to body these are the best quality arches available. The flares attach by screws to the same body lip as the plastic chrome moulding sits on. These were jigged and fit perfectly to original MK1/2 shells. Also available are MS134 which are copies in ABS plastic 2.5" wide(1/4"wider)and fit as easy.

For between the arches we like DDJ10002MS black sill trims.

£86.10 exc vat

£103.32 inc vat

In stockIn stock

Recommended usage 1 x MS133MS to fit one mini.

Alternative products

These are good fitting plastic ABS arches and the same profile as the original W&P type arches but a 1/4" wider @ 2.5" wide approx on the front. Comes with wheel arch to body trim and rivets.



these come in a satin black finish, but...

Kit contained products

1 metre will do a car set of overiders (32" 0R 815mm actually needed). Each piece was originally cut to 3" (6" per overider). Some people have also used this for fibre glass wheel arch to body seal for neatness such as w&p arches.

People also bought products

Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...

Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.

16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...

In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.

This is a black screw set for fitting GAW117 plastic wheel arches.

These are provided in GAW117 wheel arch kit although most originals were held on by pop rivets.

A full set of four arches and two side trims as fitted to all factory cars from 1984 on as standard fitment. Kit includes set of black screws although some were originally held on by pop rivets ADU8629

The last product from the factory in wheel arches (flares) are these fancy "Sportspack" arches. Factory originals are expensive but this fibreglass set will give the same look. Also see ARCH001. As with all fibreglass products, some modi...

Black Plastic Fluted Strip, runs between the 2 plastic Mini Special Arches. Fitted as standard from 1984 to 1992. Approximately 1270mm long.

This top quality arch kit sticks out 3.25", including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are visible and plastic wheel arch moulding can be retained. Rear arch stops at bumper seam line. These are original ST ...

Screw on black plastic wheel arch as fitted to factory specials plus innocentis and all minis from 1984 on until the sportspac arch. The grey type fitted to Mayfairs are no longer available. This is the right hand front and ready to screw on.

These are good fitting plastic ABS arches and the same profile as the original W&P type arches but a 1/4" wider @ 2.5" wide approx on the front. Comes with wheel arch to body trim and rivets.



these come in a satin black finish, but...

Genuine Rover as fitted from 1970 on as standard. Real chrome foil inlay unlike GZF107MS which is actually silver but looks chrome--buy the Genuine real thing at the right price.

This is the genuine flat type chrome trim that...

This is a set of four original moulded wheel arches as fitted to the Sportspack mini with 13" wheels. This does not include the black rubber seam mouldings DDJ10002 between the front and rear arch on each side.

It also does not ...

In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.

3.3mm thick from the tanneries for use on horse bridles,wit...

Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.

New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...

New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard Black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...