£490.20 exc vat
£588.24 inc vat
In stock
It also does not include the metric nuts to fit which are avaiable as GFK3295
All arches are available as separate replacements.
Arches are finished in grey primer.
£490.20 exc vat
£588.24 inc vat
In stockRecommended usage 1 x MS135 to fit one mini.
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...
Original metric fixing nut for genuine Rover sportspack arches.
If you fit 13" wheels and need to cut the wings away for clearance these are the reinforcements strips Rover used on the cars with Sportspack arches.
see Downloads on web site for diagrams on where to cut wings and A panels under part number...
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
Set of four very good copies of the original rubber wheel arches as fitted to
the sports pack models from 1997 on. Not quite as good as genuine in finish perfection,BUT THE DOWN SIDE is the coating needs proper etch primer for applying paint...
The last product from the factory in wheel arches (flares) are these fancy "Sportspack" arches. Factory originals are expensive but this fibreglass set will give the same look. Also see ARCH001. As with all fibreglass products, some modi...
Original genuine rubber wheel arch to body seal with self adhesive backing. Factory fitted to all late Minis with either Sportspack arches or colour coded plastic arches.
Length 107cm. Sold individually.
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
Fixing stud for latest new type genuine Sportspack arches. (Five required per arch)
The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is the Minispares version which is a slightly more rounded profile.
Original metric fixing nut for genuine Rover sportspack arches.
Black Plastic Fluted Strip, runs between the 2 plastic Mini Special Arches. Fitted as standard from 1984 to 1992. Approximately 1270mm long.
Ultimate Wheel arch flares of choice if PREMIER quality of looks and FITTABILITY is the prime objective. The "WP" Wide profile style fibreglass flares not only look smooth and sleek but will cover most 10"-12" wheels of your choice.
Many ...
In 1993 the moulding between the wheel arches was changed from black plastic to rubber and was still used on twin point rubber arches. This is a Rover part but is different to what was originally fitted. Alternatively GZF105A and [link]G...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.
Minispares 2 piece plastic roof moulding kit specially shaped for the corners and drain holes as fitted from 1980on in black.
The 2 joining and finishing clips are DBE10006PMD which need to be ordered seperately. The last Rover...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...
New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard Black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...
Pair of Genuine Mini Spares original type black plastic mirrors fitted as standard from 1980 and have been supplied by us since 2015 when Rover ceased production.
These mirrors are denoted by being supplied with a slightly different shape b...
GENUINE MINI SPARES PRODUCT supplied with a slightly different plastic base cover-see EAM4159.
This is the the only mirror available since Rover stopped supplies.
The best way to drive a Mini is very defensively and kno...
A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.
The best chrome type available with screw and washer.
A headlight trim ring is only the starting point of a good looking car, but you have to start somewhere. Sold singly 2 required per car. These are the original type chrome over solid bras...
These Mirrors are made in the UK by Tex. Slightly convex lens gives excellent rearward visibility. Left side. Right is GAM217. For fitment to laters cars originally fitted with plastic mirrors, use fitting kit M90997. See also
G...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.