WHEEL ARCH L/H REAR SHOCK ABSORBER TURRET REPAIR P...

This is the Left hand rear panel see HMP441011 and also 14A9558/9 complete arch.

£75.00 exc vat

£90.00 inc vat

BARREL LOCK SET FOR PUSH BUTTON TYPE DOOR HANDLES ...

BARRELSET

Key barrel set for Mk3 onwards door handles and boot handles.

£19.22 exc vat

£23.06 inc vat

BOOT BOARD BRACKET SET 5.5 gallon tank 165 tyre

CCC115A

This kit contains all the brackets and mounts required for fitting Minis with 10" 165 tyres.

The boot board bracket 14A9783 is not included

For 10" wheels with 145 tyres see CCC115

For use with boo...

£39.56 exc vat

£47.47 inc vat

BOOT BOARD BRACKET CLIP ON BOARD

14A9783

The bracket fitted to the boot board and is not in any kits.

When a boot board is fitted the following brackets are required

14A9780x2 U shaped for the rear to hold the board

14A9781x2 side bracket with plug for board to si...

£5.25 exc vat

£6.30 inc vat

CARPET FULL BOOT LINER KIT IN BLACK 7.5 GALLON TAN...

CCC118

Full carpet boot liner kit, completely lines the inside of the boot area.

Not suitable for MPI minis.

£46.50 exc vat

£55.80 inc vat

BOOT SEAL CLIP KIT

14A6585KIT

Used on all MK1/2/3 bootlids there are 26 little holes drilled around the inner edge to hold the seal on and this kit contains the 26 clips. For single clips see 14A6585. Later cars 1988 on fitted a seal to the body only. (CKE10018)

£10.53 exc vat

£12.64 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

£33.00 exc vat

£39.60 inc vat

REAR BACK PANEL LOWER HALF MK2 on

HMP441019

genuine rear lower back panel for MK2/3 on, which goes up as far as lower edge of backlight seal ridge

£260.00 exc vat

£312.00 inc vat

BOOT HINGE GASKET LOWER

24A2176

These gaskets should be changed when replacing the hinges, this one goes between the bootlid hinge on the body, see 24A2175 also for upper on bootlid.

£0.34 exc vat

£0.41 inc vat

BOOT LID HINGE GASKET UPPER

24A2175

These gaskets should be changed when replacing the hinges-this one goes between the bootlid hinge on the bootlid. See also 24A2176 for gasket on body.

£0.32 exc vat

£0.38 inc vat

FIBREGLASS MK1 BOOTLID DOUBLE SKIN

MS112

Not just a skin, but a complete MKI boot lid with inner skin. Lightweight, rustproof and well finished.

£141.00 exc vat

£169.20 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

£33.00 exc vat

£39.60 inc vat

BOOT LID SEAL EARLY TYPE (REQUIRES 26 x 14A6585)

14A6584

Bootlid seal for Mini <91. Held in place on the boot lid using 26 clips(part# 14A6585).When fitting, the lip part of the seal open end for clips should face the inner boot catch- (the open end of the seal facing inwards to the bootlid al...

£9.15 exc vat

£10.98 inc vat

NUMBER PLATE HINGE R/H MK1/2

14A6466

The MKI & MKII number plate panels 14A6468 are hinged at the top to swing out clear of the bumper when you open the boot lid. They were unavailable for years but now they're back. These & 14A6467 are the hinges.

£6.65 exc vat

£7.98 inc vat

NUMBER PLATE REAR MK1/2

14A6468

The MKI & MKII number plate panels 14A6468 are hinged at the top to swing out clear of the bumper when you open the boot lid. They were unavailable for years but now they're back. If you also need the hinges they are 14A6466...

£12.00 exc vat

£14.40 inc vat

REAR SCREEN RUBBER SEAL - Mk2 to 2000

JRC2674

Genuine Mini Spares quality product. For Mk1 cars use 14A8744

For Pickups you will need to cut and shorten either seal and make sure the join is at the bottom. The extrusion is the correct shape.

This seal is the best ...

£9.70 exc vat

£11.64 inc vat

BOOT LID CABLE (SINGLE)

14A6740

These two simple cables are all that keep the boot lid from crashing down, damaging hinges, bumper and paint. When one fails we recommend replacing both to be sure of the same length. sold singly 2 required per car

37H3043 can be u...

£2.45 exc vat

£2.94 inc vat

BUMPER STAINLESS STEEL WRAP AROUND ENDS

DPB10166

Genuine Mini Spares manufactured bumper from our own tooling that fits perfectly as per original ROVER bumpers. Better than the last genuine bumpers produced for Rover which is why we laid down tooling - BEWARE - most others available in stainless ar...

£55.50 exc vat

£66.60 inc vat

NUMBER PLATE HINGE L/H MK1/2

14A6467

The MKI & MKII number plate panels 14A6468 are hinged at the top to swing out clear of the bumper when you open the boot lid. They were unavailable for years but now they're back. These & 14A6466 are the hinges.

£6.65 exc vat

£7.98 inc vat

NUMBER PLATE REAR CHROME LAMP Mk1 & Mk2

BHA4153

Original chrome metal D shape type lamp as fitted to Mk1 and Mk2 Minis. Also used on many British cars in the 1960s. A plastic version is available as BHA4154 and 83H335 for black. Has the original hexagonal nut on body whic...

£27.71 exc vat

£33.25 inc vat

WINDSCREEN FILLET SILVER STRIP (FRONT OR REAR)

24A1466MS

The plastic chrome insert for fitting in the windscreen and backlight rubbers of all minis. You will require TOOL02 to fit these.

£4.50 exc vat

£5.40 inc vat