If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...

Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.



EU label informat...

Deep polished dish wheel with 68mm centre cap hole and takes normal CN5 type nuts

A plastice chrome centre cap for our Special Tuning wheels--from October 2004 the design was slightly improved with a cleaner look rather than the old 1960 magnesium rough finish appearance and at that time the cap was changed from alloy to plastic f...

Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.

Not much choice on 13" wheels now bridgestone have discontinued the Mini size but don't worry as this was everybodies favourite for alround motoring. Also see TYRE25 for the AO48R type from Yokohama.



EU label informat...

Nankang 175/50/13 AS-1 performance tyre

Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".

Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.

For wheels with 60 degree radius angle seats CN2/CN5 or 113087 as fitted from 1984 on 12" steel wheels by Rover or any alloy with same seating including our minilife 5x12 WHL1021.