£8.10 exc vat
£9.72 inc vat
In stock
£8.10 exc vat
£9.72 inc vat
In stockRecommended usage 1 x SR3 to fit one mini.
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tire rub on the inside. Spacers are sold by the pair, and include longer (2.25") wheel ENJO1039 studs. Cars fitted with spacered ...
these are the special spacer type bolt that are in the BG4001 kit. they screw on the original stud to give the extension
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be u...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer 21A2064L wheel studs.
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub on the inside. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will ...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair and include longer wheel studs. Spare studs are ENJO-1039.
If you ar...
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by wheel sockets. This uses 17mm socket.
Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.
rear fitting 69mm spun alloy cap for 12"wella steel wheels only has a logo face of 45mm-less wella sticker--wella stickers are now obsolete
Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
55mm wide chrome centre cap with 40mm face with leyland "ST" logo centre as supplied on wheels This fits the ST Minispares Minator 5x10 and 6x10 8 spoke wheel, which have a flat fronted outer rim as per all the ST designs since 25/09/04 but now has a...
Replacement wheel 68mm centre cap for C-21A1982 deep dish Minilight wheels. Sold individually.
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Stainless steel sleeve nut with tapered washer.
5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.
The best reason for buying our wheels is that spare ...
The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...
Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.
Wheel bolt for Minilites.
The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.