MAINS SET 10 OVERSIZE 1275 PRE A PLUS
VP91120-10

£34.50 exc vat

£41.40 inc vat

Out of stockOut of stock
Main bearings, 1275 2" mains. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a competition motor. Mahle manufacture..Quantity required-1 set.

£34.50 exc vat

£41.40 inc vat

Out of stockOut of stock

Recommended products
ENGINE BUILD LUBE TORCO.4 Oz
KCLUBE

Favoured by proffessionals for press fitting pistons, pre lubing bushes, roller and plain bearings, journals and gears. Prevents scuffing, seizure, wear, rust. Waterproof and corrosion proof.

£10.88 exc vat

£13.06 inc vat
CRANK THRUST WASHER SET 1275
VPW41

Set of std VP thrust washers for 1275.

£14.25 exc vat

£17.10 inc vat
Alternative products
MAINS SET 10 OVERSIZE PRE A PLUS/EARLY A+ 1275
AEM91120-10

Main bearings, 1275 2" mains. 10 thou oversize. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.



ACL branded



£30.00 exc vat

£36.00 inc vat
People also bought products
CRANK THRUST WASHER SET STANDARD 1275
ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat
CAM LINER SET 1275
ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat
MAIN JOURNAL SET A PLUS +10 SIZE 1275cc
VM1005-10

Mahle RACE quality +10 size main bearings for A Plus 1275cc only as used by competition engine builders..Quantity required-1 set.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the ...

£90.00 exc vat

£108.00 inc vat
MAIN JOURNAL SET STD SIZE 1275cc Pre A Plus
VM1004-00

Mahle RACE quality std size main bearings for Pre A Plus 1275cc as used by competition engine builders.Quantity required-1 set.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the UK...

£90.00 exc vat

£108.00 inc vat
CON ROD JOURNAL SET STD 1.625" 998/"S"
VC1017-00

Mahle RACE quality std size shells as used by competition engine builders.

For 1.625" big ends on 998 and Cooper S.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the UK. Th...

£91.35 exc vat

£109.62 inc vat
CON ROD JOURNAL SET-1.75"RACE NOT 'S'
VC1003-00

Mahle RACE quality std size shells as used by competition engine builders.

for 1.75" big ends on 1275cc.

RACE quality bearing set being made at the Mahle Motorsport Race Bearing Division Vandervell F1 plant in the UK. This is an up...

£90.00 exc vat

£108.00 inc vat
BIG ENDS PLUS 40 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-40

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat
BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat
BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S
AEB572-40

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£28.02 exc vat

£33.62 inc vat
CRANK THRUST WASHER SET 1275 30 THOU OVERSIZE
VPW41-030

Set of +.030 thrust washers for 1275.Very useful for machining down when fitting non S cranks in 1275cc block

£14.00 exc vat

£16.80 inc vat
CRANK THRUST WASHER SET 1275
VPW41

Set of std VP thrust washers for 1275.

£14.25 exc vat

£17.10 inc vat
BIG END SET STANDARD 998/1100 & COOPER S
VP572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. Vandervell, once the only bearings to use on a competition motor they are now made by Mahle. ACL is now commonly used in race engines.

£36.75 exc vat

£44.10 inc vat
MAINS 998/1100+10 PRE A PLUS - MAHLE WAS VANDERVEL
VP733-10

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 10 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide.

£30.00 exc vat

£36.00 inc vat
998/1100 MAIN SHELLS PRE A PLUS - MAHLE
VP733-00

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at standard size. Early 850 mains were VP592 and 1.185" 30.10mm wide..Quantity required-1 set.

£30.00 exc vat

£36.00 inc vat
CAMSHAFT LINER SET 850 998 & 1100
AEC3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£12.09 exc vat

£14.51 inc vat
BIG END SET 20 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-20

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£30.00 exc vat

£36.00 inc vat
CRANK THRUST WASHER SET 1275 3 THOU OVERSIZE
AEW2136-003

Set of +.003 thrust washers for 1275.

£7.60 exc vat

£9.12 inc vat
CRANK THRUST WASHER SET 998/1098
AEW2122

Standard size crankshaft washers as a set of four, fits 998 and 1100cc.

£10.70 exc vat

£12.84 inc vat
BIG END SET 10 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-10

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

£28.50 exc vat

£34.20 inc vat
BIG ENDS PLUS 20 OVERSIZE 998/1100 COOPER S
AEB572-20

Con rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£32.00 exc vat

£38.40 inc vat