Side mounted for 1990 to 1996 side mounted radiator. UK made with 2 core tubes. V shape fins 20 per inch the BIG Daddy of all rads.
This is a super cool lightweight alloy radiator for 1990 on cars with a 1275 engine which has the overflow pi...
This sleeve is used with the 11G227 grommet on all one piece radiator surround top brackets.
These 1/4"UNF 3/8" long bolts were used on the one piece cowling from 1974 on. Many people have punctured their radiator by using too long a screw. Also used as the small timing cover bolt on A series engines. Also the small bolt on the front wheel c...
this lower radiator bracket originated when the one piece rad cowling was introduced
Alloy bracket on the end of the gearbox for supporting the lower radiator bracket 12A361 to mount on. Second hand "USED" parts only as Rover no longer have stocks--cleaned but they are old used items but all perfectly servicable
The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost square cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubbe...
Side mounted as per all pre 1996 cars. UK made with 2 core tubes. V shape fins 20 per inch the BIG Daddy of all rads.
This is a super cool lightweight alloy radiator BUT FOR PRE 1990 cars as it has the overflow pipe facing backwards.
Same as C-ARA4442 but supplied with a screw-in heat sensor unit, as required and fitted initially by Rover to SPI cars. Minispares adapted the safer screw type sensor as compared to the push and turn fit used by Rover, which on certain v...
Special bracket for holding the front mounted radiator on twin point injection cars from top of front panel
Metal type expansion or rad cap with no pressure spring, commonly used on race prepared cars and all Austin -Morros 1100/1200 derivatives plus Aussie Mokes.
There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...
Sensor type Radiator that uses the original Rover clip in type sensor hole in the bottom which was fitted from 1991 up until the introduction of the twin point front mounted type.
This is a Cuprobraze 3 tube modern design version with 9 gill...
Known as"4-Core" Radiator, because it has 4 offset tubes in the core it is the only real "4-core" radiator available today manufactured in the UK since 1978 for MiniSpares with original top header tank shape. Our design has been proven to be the best...
This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.
Minispares own UK manufactured product with original shape mini header tank, now with drain plug in lower tank which doubles up to also accept the screw in type sensor for later cars. It has about 20 fins/ gills per inch with 2 tubes in the core and ...
Standard Mini radiator with 3 offset tubes in the core. Metric thread fixings.
Flanged metric thread bolts are available as FS106107separately.
See also, alloy radiator in same shape but 2x18mm tubes as an alternative
Top and bottom rad cowling for the mini "except Cooper and S pre 1975" when the one piece suround replaced this item. The lower radiator fixing bracket is flush with the cowling face on the mini version, but on the bottom cowl of the Cooper version i...
Top and bottom rad cowling for the mini Cooper and S to 1971,
plus a few 1275GT to 1974.
The fixed bracket on the bottom cowl is moved further away from the engine towards the radiator. This also uses a bent rad bracket [link]12A293...
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London with a drain hole and plug- this hole also accepts the sender unit as used on later cars from 1991 which is available as C-ARA4446 kit....
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.