Genuine rubber plug from Rover to fit on the water pump or cylinder head by pass hose tubes when deleting the hose.For the cylinder head you can fit a blanking plug but the water pump would need changing to GWP187 which has no outlet
genuine head gasket set for A plus engines with HIF type carb
see GUG701152HS for A plus with HS4 carb
Minispares universal kit for all is AJM1250MS but does not include the HIF44 carb gaskets ...
Genuine head gasket set to suit A plus engines with the late head gasket which is considered one of the best. For all models with HIF44 and HIF38 except it has no elbow gasket for HIF38 carb to air cleaner.
See GUG701114HS for H...
As an engine wears, the clearance between the valve stem and guide increases; as this gets beyond tolerances the car will tend to smoke under deceleration (when you take your foot off the throttle). Good valve stem seals will allow for greater wear b...
genuine head gasket set for minis with 1275cc engine from 1990-94 with HIF38 or
HIF44 carb and a reinforced manifold gasket. see GUG701186 also which was for HIF44 carb with standard manifold gasket. Use AJM1140MS and if you have the HIF38 c...
Original rocker cover cap without internal filter==now use 13H2296
Kit includes genuine head gasket, valve cover gasket, manifold gasket, thermostat gasket, all carb gaskets, etc. Fits all 850/998 948cc and 1098cc Pre A plus engines. Use Minispares parts together with a GUG702506HG head gasket
genuine set of cylinder head gaskets for A Plus engines with HS4 carb .
See picture for contents
fit with copper side upwards
Only a few parts in this kit but thats all you need for the twinpoint engine headset with the latest head gasket and correct manifold gasket.
Only available as a cork version now this has the cut out for the 11 stud cylinder heads as used on the original Cooper S variants.
Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG
Forget all the universal shape gaskets available - this is the original correct shape made out of thick gasket paper.
Made of thicker, more pliant material with larger ports than the original gaskets. A must for use on ported heads.
Genuine Minispares head gasket with 3.35cc compressed volume
It is generally believed that the best head gaskets are made of copper but there is more than one copper head gasket on the market. Fits 850/997/998/1100cc
Original Payen...
Payen stamped AF470, Standard composite reinforced gasket used on all large bore engines by Rover is an exceptionally good gasket. Asbestos free with special black sealing ring for the oil feed. Compressed volume is 4cc. This MINI head gasket has in ...
Made especially for turbos to stop leakage and heat problems this gasket has metal ring retainer inserts on the exhaust ports. Sold singularly.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.