BULKHEAD TO HYDROLASTIC PIPE ADAPTOR PLATE R/H

21A1522

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

In stock

Hydrolastic cars only this bracket clamps under the clutch pipe and top engine steady bulkhead bracket to retain the brake line and hydrolastic pipe.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

In stock

Recommended usage 1 x 21A1522 to fit one mini.

Front Hydrolastic Displacer Suspension ( Known as - Qty 1

People also bought products

SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER

GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat

TOP ARM REBOUND BUFFER POLY MOUNT ON STAINLESS BAS...

2A4267POLY

Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base

($2.93) £2.93 exc vat

($3.52) £3.52 inc vat

POLY UPGRADE TRACK ROD END/KNUCKLE GAITER

21A425EVO

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

LARGE GROMMET FOR CLUBMAN INNER WING

CZH1720

Large blanking grommet for the Clubman inner wings, 1.5".

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

MK1 SWITCH PANEL CONVERSION PLATE

MS029

This is small plate that welds into the later lower dash rails to convert them to mk1 size for people who want early switches in a late car.

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

DAMPER CAPTIVE NUT PLATE

14A6948

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

($4.14) £4.14 exc vat

($4.97) £4.97 inc vat

MK3 DOOR HANDLE & BOOT FITTING AND GASKET KIT

CZH1785FK

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

($4.74) £4.74 exc vat

($5.69) £5.69 inc vat

REAR SUBFRAME BOLT KIT LESS BUSHES AND SUPPORT PIN...

MS44BOLT

All the Nuts, bolts and washers you will need to fit a rear subframe to your car, less the support pins and bushes. These kits are aimed at those wanting to fit different rear subframe bushes such as the Poly bushes.

($5.92) £5.92 exc vat

($7.10) £7.10 inc vat

Mk1 REAR SCREEN RUBBER SEAL

14A8744

Rear screen seal for mk1 cars which had the smaller rear window 1959-1967.

($11.50) £11.50 exc vat

($13.80) £13.80 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

DOOR POCKET TRIM EARLY SCREW LUG TYPE MK1

14A6879

The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.

This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...

($13.00) £13.00 exc vat

($15.60) £15.60 inc vat

SUBFRAME FITTING KIT FOR PRE 76 FRONT DRY SUBFRAME

21A2570FK

Front subframe fitting kit for pre 76 twin bolt subframes, locktabs are included but not the subframe tower spacers as these rarely need changing.

($17.94) £17.94 exc vat

($21.53) £21.53 inc vat

WINDOW CHANNEL L/H FOR METAL CATCHES MK1

14A6770

Early Mini runner for metal type window catches pre May 1963 with sliding windows on the L/H front doors, these are the runners that hold the channel and have holes to lock the window catches. Now made in stainless steel by Minispares to ease rust pr...

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

WINDOW CHANNEL R/H FOR METAL CATCHES MK1

14A6769

Early Mini runner for metal type window catches pre May 1963 with sliding windows on the front doors, these are the runners that hold the channel and have holes to lock the window catches. Now made in stainless steel by Minispares to ease rust proble...

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

REAR SUBFRAME FITTING KIT INC TRUNNIONS PRE 1976

MS42

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis up to 1976 on but the later kit MS41 will fit early...

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat

SUBFRAME TRUNNION FOR REAR OF REAR SUBFRAME MINISP...

2A5819MS

Mini Spares product,metal trunnion to hold the 2-2A5818MS bushes on the rear subframe.

Originally there were 4 of these trunnions on the subframe but in 1976 (MK4)the front 2 brackets were strenghened and enlarged to [link]21A2...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

CAMBER AND TOE REAR TRACK ADJUSTMENT BRACKETS

MS73EVO

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

($37.80) £37.80 exc vat

($45.36) £45.36 inc vat

REAR SEAM TO ARCH REPAIR PANEL LH