DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

In stockIn stock
High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

In stockIn stock

Recommended usage 2 x ADA5671MS to fit one mini.

Recommended products
DOOR CHECK STRAP CLEVIS PIN FOR RETAINING ADA5671
CLZ412

The pin that goes into the door stay check arm on the door itself on all minis with wind up type windows from 1970 to 2000.

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
SPLIT PIN FOR CLZ409 HANDBRAKE LEVER / ROCKER SHAF...
GFK101

For CLZ409 clevis pin on rear brake levers.

Split pin for common clevis pin list

GFK101 for CLZ409 handbrake levers to cable on rear drum

GFK102 most mini clevis pins exce...

($0.05) £0.05 exc vat

($0.06) £0.06 inc vat
CHECK ARM RUBBER GROMMET N/S 1970-1986
CZH4053

Moulded shape type left hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat
CHECK ARM RUBBER GROMMET O/S 1970-1986
CZH4052

Moulded shape type right hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
Alternative products
DOOR CHECK STRAP MK III ONWARDS
ADA5671

Genuine door check strap for MK3 cars with wind up window doors.(use with retaining pin CLZ412 ). Beware! there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat
People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

($255.00) £255.00 exc vat

($306.00) £306.00 inc vat
CHROME DOOR HANDLE SET MITH MK3 DOOR HANDLE MK1 BO...
CZH1784

A complete set of 2 front door and one boot handle in chrome all with the same key numbers for wind up window door minis 1970on (keys included). Ideal for customers who have made their mk3 car more retro by converting to a mk1 rear or Clubman Estate ...

($76.50) £76.50 exc vat

($91.80) £91.80 inc vat
STAINLESS STEEL GLASS WINDOW RAIL SUPPORT KIT WITH...
MSSK2105SS

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

($11.63) £11.63 exc vat

($13.96) £13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
DOOR HINGE FITTING KIT COMPLETE MK3 ON
MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

($18.09) £18.09 exc vat

($21.71) £21.71 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
DOOR PLATE BUFFER SCREW ( SHORT )
CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat
SCREW FOR MK3 DOOR HANDLE
PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

($0.30) £0.30 exc vat

($0.36) £0.36 inc vat
VAN REAR HINGE GASKET
ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
WIND DEFLECTORS FOR FRONT DOORS WIND UP WINDOW TYP...
MSA1102

A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.

($53.49) £53.49 exc vat

($64.19) £64.19 inc vat
DOOR SEAL UPPER L/H TWIN POINT CARS 1996on
CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat
DOOR SEAL UPPER R/H TWIN POINT CARS 1996on
CFB101120

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim. fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat
DOOR SEAL LOWER L/H TWIN POINT CARS 1996on
CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
DOOR SEAL LOWER R/H TWIN POINT CARS 1996on
CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat