($75.00) £75.00 exc vat
($90.00) £90.00 inc vat
In stock
plus a few 1275GT to 1974.
The fixed bracket on the bottom cowl is moved further away from the engine towards the radiator. This also uses a bent rad bracket 12A293 from the lower cowling to 12A361 engine mount bracket.
For 850/998/1098 mini 1959 to 1974 see ARA2769
A One piece rad cowling fitted from 1975.
($75.00) £75.00 exc vat
($90.00) £90.00 inc vat
In stockRecommended usage 1 x ARA2770 to fit one mini.
When the "S" motor was introduced to the public a two piece vibration damper was also introduced. This is reputed to be the best system for vibration control for the Mini motor. The only problem with it was that is was bigger and wider than the o...
Replacement plug and washer for Minispares 2 core and 4 core radiators. M22 x 1.5
m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)
original imperial radiator screws were SH604031 or PK type were ARA1117
Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...
2 per engine-Longer lasting poly type radiator grommet in Yellow for 1974 on.
These were first used on the one piece cowling from 1974 on. These fit on the lower retaining bolt and 2 are required but sold singly.
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London. This is the C-ARA4444B radiator plus the sender unit for later cars 1991 on. Their design has been proven to be the best 4-core at...
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London with a drain hole and plug- this hole also accepts the sender unit as used on later cars from 1991 which is available as C-ARA4446 kit....
Top and bottom rad cowling for the mini "except Cooper and S pre 1975" when the one piece suround replaced this item. The lower radiator fixing bracket is flush with the cowling face on the mini version, but on the bottom cowl of the Cooper version i...
Standard Mini radiator with 3 offset tubes in the core. Metric thread fixings.
Flanged metric thread bolts are available as FS106107separately.
See also, alloy radiator in same shape but 2x18mm tubes as an alternative
Minispares own UK manufactured product with original shape mini header tank, now with drain plug in lower tank which doubles up to also accept the screw in type sensor for later cars. It has about 20 fins/ gills per inch with 2 tubes in the core and ...
This is the larger 5/16" unf that goes though the rear subframe mounting trunnion. Cars manufactured before 1976 require 4 of these, after 1976 require 6. Sold individually.
Known as"4-Core" Radiator, because it has 4 offset tubes in the core it is the only real "4-core" radiator available today manufactured in the UK since 1978 for MiniSpares with original top header tank shape. Our design has been proven to be the best...
There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...
Metal type expansion or rad cap with no pressure spring, commonly used on race prepared cars and all Austin -Morros 1100/1200 derivatives plus Aussie Mokes.
Same as C-ARA4442 but supplied with a screw-in heat sensor unit, as required and fitted initially by Rover to SPI cars. Minispares adapted the safer screw type sensor as compared to the push and turn fit used by Rover, which on certain v...
Side mounted as per all pre 1996 cars. UK made with 2 core tubes. V shape fins 20 per inch the BIG Daddy of all rads.
This is a super cool lightweight alloy radiator BUT FOR PRE 1990 cars as it has the overflow pipe facing backwards.
The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost square cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubbe...
this lower radiator bracket originated when the one piece rad cowling was introduced
These 1/4"UNF 3/8" long bolts were used on the one piece cowling from 1974 on. Many people have punctured their radiator by using too long a screw. Also used as the small timing cover bolt on A series engines. Also the small bolt on the front wheel c...
This sleeve is used with the 11G227 grommet on all one piece radiator surround top brackets.
Long lasting silicon by pass hose between cylinder head and water pump.
These are easy to cut and slide on easier than the old conventional rubber type.
It has been made this length to fit 1275cc engines which used the longest hose....
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.