MANIFOLD DOWNPIPES FROM EXHAUST MANIFOLD+PIPE.CARB...
C-AEG370

($104.47) £104.47 exc vat

($125.36) £125.36 inc vat

In stockIn stock
Downpipe with sensor take off hole to fit the original exhaust manifold on the late (from 1990) Mini Cooper and MG Metros when using HIF6/44 carburettors. Y piece outlet end is 1.875" outside diameter, 1.75" inside diameter.

This part comes with C-AEG375 manifold to catalyst pipe

This allows you to RETAIN the catalyst and fit an RC40 complete system.

Needs GEX7801 clamps to fit

($104.47) £104.47 exc vat

($125.36) £125.36 inc vat

In stockIn stock

Recommended usage 1 x C-AEG370 to fit one mini.
Inlet and Exhaust manifolds except Injection - Qty 1

Alternative products
EXHAUST MANIFOLD CLAMP FOR 1990 ON 1275 CARB MINI
GEX7801

Twin Down pipe clamp for Carb Coopers 1990 on wards, and Metro's.

Also used as a single clamp on manifold for cars fitted with HIF38 carb cars from 1991 on.

($2.95) £2.95 exc vat

($3.54) £3.54 inc vat
People also bought products
MANIFOLD TO DOWNPIPE EXHAUST CLAMP
GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
MANIFOLD GASKET INLET / EXHAUST
AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat
MANIFOLD LINK PIPE WITH KNUCKLE FROM LCB TO CATALY...
C-AEG375

Link pipe for fitting between the LCB and the catalyst. It has a stainless steel knuckle joint to prolong life and give the flexibility required on the system to overcome damage. See also alternative RC40-016

Y piece replacemen...

($45.83) £45.83 exc vat

($55.00) £55.00 inc vat
BLANKING PLUG FOR LAMBDA SENSOR HOLE
MYB100040

Blanking plug to blank of the Lambda sensor hole on all SPI/MPI models.

($2.63) £2.63 exc vat

($3.16) £3.16 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat
CATALYTIC CONVERTER NUT M10 METRIC
NV110051

THE M10 METRIC NUT THAT SCREWS ON THE THREAD BOLTS OF THE CATALYLITIC CONVERTER

($0.61) £0.61 exc vat

($0.73) £0.73 inc vat
EXHAUST RC40 CLASSIC EXHAUST MILD STEEL AND FITTIN...
RC40PACKAGE001

Original side exit RC40 Std bore exhaust, LCB short downpipe and fitting kit.

This includes the short downpipe for use with the Long Centre Branch type manifold. Use manifold C-AEG365.

($73.31) £73.31 exc vat

($87.97) £87.97 inc vat
EXHAUST HANGER BRACKET ON REAR OF REAR SUBFRAME
C-ARA671

This is a bolt on conversion bracket to fit on the rear of the rear subframe to take the later type rubber strap mounted exhaust systems.Later subframes 1991 on had these parts welded in position.

($12.96) £12.96 exc vat

($15.55) £15.55 inc vat
EXHAUST MANIFOLD CLAMP FOR 1990 ON 1275 CARB MINI
GEX7801

Twin Down pipe clamp for Carb Coopers 1990 on wards, and Metro's.

Also used as a single clamp on manifold for cars fitted with HIF38 carb cars from 1991 on.

($2.95) £2.95 exc vat

($3.54) £3.54 inc vat
STAINLESS STEEL RC40 SIDE EXIT REAR SILENCER STAND...
RC40-051

The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they n...

($158.01) £158.01 exc vat

($189.61) £189.61 inc vat
RC40 EXHAUST FITTING KIT
RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

($6.85) £6.85 exc vat

($8.22) £8.22 inc vat
EXHAUST HANGER BRACKET ON FRONT OF REAR SUBFRAME
C-ARA670

these bolt onbrackets were made to fit on the rear subframe when fitting the later type rubber hanging strap exhausts. this one fits on the front of the rear subframe.

cars from about 1991 on had these brackets welded in position

($12.96) £12.96 exc vat

($15.55) £15.55 inc vat
GASKET FOR EXHAUST CATALYTIC CONVERTER
GEX7761

Metal gasket for the catalyst and is the same both ends for Cooper 1275CC RSP early cars, but only fitted on the front to later cars. If you cannot fit this gasket on the rear your car does not need one.

($0.67) £0.67 exc vat

($0.80) £0.80 inc vat
STAINLESS STEEL MIDDLE SILENCER FROM CAT TO REAR S...
RC40-062

This is for cars with a catalyst fitted and you require a twin box exhaust system.

This small silencer fits from the catalyst to the rear exhaust box of your choice.

($107.93) £107.93 exc vat

($129.52) £129.52 inc vat
EXHAUST RUBBER MOUNTING FROM 1990 ON
DBP7104

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat