ROCKER COVER MINIFIN TYPE
CAM6822

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

In stockIn stock
Ribbed fins on a slant similar to MG Metro original equipment.This is the traditional dress-up for the engine compartment! Great looking, easy to clean and helps cool engine oil. Red plastic Cap is included, but is not the original colour red, we can supply the original colour cap as GFE6007 as fitted by Rover or chrome as shown on picture FP27.

Despite claims by many to fit over high lift alloy rockers they usually need to be juggled around on the bolt holes or slightly relieved in corners in most cases even with silicon rocker cover gasket GUG705009EVO so a knowledge of engine building is essential to make sure hi lift rockers have clearance. Requires CAM6823 rocker cover bolt which is slightly longer.

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

In stockIn stock

Recommended usage 1 x CAM6822 to fit one mini.
Cylinder Head Valve Sizes - Qty 1
Engine Components Cylinder Head - Qty 1
Timing, side plate and rocker covers - Qty 1

Recommended products

Longer version of GM038P chrome rocker nut for use on CAM6822 rocker cover as fitted to MG Metro. Also usefull when fitting other rocker covers or Silicon rocker cover gaskets where more thread length is required. These are ...

Kit products
People also bought products

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

Unlike polished covers, these powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available in ...

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

Spacers for under the rocker pedestals are used mainly by engine tuners to allow tappet adjustment to be made where cylinder head mods have been carried out. 1.3mm/0.0512" thick, this can be used to hold locating screw on rocker post assembly but the...

Early Large cotter groove exhaust valve. Most small bore engines seem particularly prone to burning valves, it is highly recommended to replace the exhaust valves when you do a valve job! This 1.0" valve fits most early 948cc, 998cc and 1098cc engine...

Unlike polished covers, these black powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available ...

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Ki...

1992 TO 1996 SANDWICH PLATE. SPI AND CARB MINIS. HAS TAPPED HOLE FOR RAD BRACKET STUD. NO SENDER HOLES. SPI MINIS USE WITH 12G103 TOP HOUSING, CARB MINIS USE WITH PEQ10010(THERMO SENDER HOLE AT FRONT).

Special thin type clip for fitting the water by pass hose between the water pump and the cylinder head. Most ordinary jubilee clips will not fit the tight area where the hose fits. Also used on C-AHH8537 oil cooler hose.

New colour, PB104 bronze guides.Although Silicon bronze valve guides were used for their extremely good wear values, they were very hard and not user friendly when fitting. These valve guides are recommended when using all EN21 4N stainless steel val...

Genuine Mini Spares product as everything else on the market was poor fitting and unstable.

For Performance see 88G459EVO made in the USA by a Specialised Racing product company.

All the earlier heads used the 2A11 cott...

This is the plug that locks the rocker shaft in place via one of the 4 pedestal posts. Originally on the end pedestal it was moved inboard to the second post to help strengthen the shaft which sometimes flexed and broke.

Use this plate in place of the heater valve. For use any time the heater is removed!