DOOR LOCK PLINTH BLACK PLASTIC-pre 1991
CZH611PA

($6.99) £6.99 exc vat

($8.39) £8.39 inc vat

In stockIn stock
The square/oblong plastic finisher that goes on the door where the safety lock is located on Mk3 1970 on cars with wind up windows. This is the original style which changed on the SPI and then again on the MPI. If you have a SPI or MPI from 1991 on, ...

($6.99) £6.99 exc vat

($8.39) £8.39 inc vat

In stockIn stock

Recommended usage 2 x CZH611PA to fit one mini.
Wind up Window Doors - Qty 2

People also bought products
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
STAINLESS STEEL GLASS WINDOW RAIL SUPPORT KIT WITH...
MSSK2105SS

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

($11.63) £11.63 exc vat

($13.96) £13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
DOOR HINGE FITTING KIT COMPLETE MK3 ON
MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

($18.09) £18.09 exc vat

($21.71) £21.71 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
DOOR PLATE BUFFER SCREW ( SHORT )
CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat
SCREW FOR MK3 DOOR HANDLE
PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

($0.30) £0.30 exc vat

($0.36) £0.36 inc vat
DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2
24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat
WIND DEFLECTORS FOR FRONT DOORS WIND UP WINDOW TYP...
MSA1102

A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.

($53.49) £53.49 exc vat

($64.19) £64.19 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
DOOR SEAL UPPER L/H TWIN POINT CARS 1996on
CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat
DOOR SEAL UPPER R/H TWIN POINT CARS 1996on
CFB101120

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim. fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat
DOOR SEAL LOWER L/H TWIN POINT CARS 1996on
CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
DOOR SEAL LOWER R/H TWIN POINT CARS 1996on
CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat